| 品牌 | SKF | 型号 | LAGM 1000E |
| 类型 | 容积式流量计 | 测量范围 | 6（m3/h） |
| 等级 | ±3% from 0 - 300 bar | 公称通径 | n.a.（mm） |
| 适用介质 | NLGI 0 - NLGI 3 | 工作压力 | 70（MPa） |
| 工作温度 | n.a.（℃） |
SKF LAGM 1000E 润滑脂流量计
计量润滑脂用量
在使用润滑脂加注枪或泵手动润滑轴承时，一般很难确定润滑脂的正确用量，这可能造成润滑的过度或不足。对轴承的使用寿命造成负面影响，从而可能导致机器故障。
SKF润滑脂流量计LAGM 1000E可测量出脂量，以公制（cm³ 或g）和美制单位（US fl. Oz或oz）表示。它的耐压高达70MPa，使它成为与许多类型的润滑脂加注枪或泵组合使用的理想选择。
■ 显示加注润滑脂的体积或重量，无需进行单位换算
■高地地为轴承加注润滑脂，降低润滑过度或不足的风险
■适用于稠度等级至NLGI 3的所有SKF轴承润滑脂
■防油、脂的橡胶套保护电子装置，防撞击
■带背光的LCD显示，便于读数，有“电量低”的提示
■体积小、简洁而重量轻的设计，仅重0.3 kg
■抗腐蚀的铝制外壳封装
■易于安装和使用
技术参数
 | |
| 订货号 | LAGM 1000E |
| 外壳材料 | 氧化铝 |
| 重量 | 0.3 kg |
| IP防尘防水等级 | IP 67 |
| 适用润滑脂 | NLGI 0 - NLGI 3 |
| 工作压强 | 70 MPa |
| 润滑脂流量 | 1000 cm³/分钟 |
| 螺纹接头 | M10 x 1 |
| 显示 | 亮的LCD |
| ： | ±3% ，0 - 300 巴 |
| ±5% ，300 - 700 巴 | |
| 可选择的单位 | cm³、g、US fl. oz 或oz |
| 显示灯自动关闭 | 上脉冲后15秒 |
| 电量不足 | 显示提示 |
| 电池类型 | 1.5 V LR1 （2节）碱性电池 |
| 自动关闭 | 上一个脉冲后1分钟 |
Grease meter LAGM 1000E
Accurate grease quantity measurement for adequate lubrication
It is generally difficult to determine the correct quantity of grease when manually lubricating bearings, either using a grease gun or pump, which can result in either over- or under-greasing the bearing.
That can negatively influence the bearing's service life and possibly result in machine breakdown.
The SKF grease meter LAGM 1000E accurately measures grease discharge in volume or weight, in both metric (cm³ or g) and US units (US fl. oz or oz). It has a high maximum pressure of 70 MPa
(10,000 psi), making it ideal for use in combination with many
types of grease guns and pumps.
■Measures grease discharge in volume or weight, making conversion calculations unnecessary
■High accuracy facilitates adequate bearing lubrication, reducing the risk of over- or under-greasing
■Suitable for all SKF bearing greases of consistency classes up to NLGI 3
■An oil and grease resistant rubber sleeve protects the electronics in case of impact
■The backlit LCD displays large and clear-to-read digits, including "low battery" indication
■Small, compact and lightweight design - only 0,3 kg (0.66 lb)
■Corrosion-free aluminium housing
■Easy to install and use
Technical data
| Designation | LAGM 1000E |
| Housing material | Aluminium, anodised |
| Weight | 0,3 kg (0.66 lb) |
| Max. flow | 1.000 cm³/min (34 fl oz./min) |
| IP rating | IP 67 |
| Suitable greases | NLGI 0 - NLGI 3 |
| Maximum operating pressure | 70 MPa (10,000 psi) |
| Maximum grease flow | 1000 cm³/min (34 US fl. oz/min) |
| Thread connections | M10 x 1 |
| Display | Lit LCD (4 digits / 9 mm) |
| Accuracy | ±3% from 0 - 300 bar |
| ±5% from 300 - 700 bar | |
| Selectable units | cm³, g, US fl. oz or oz |
| Display lamp auto switch off | 15 seconds after last pulse |
| Low battery | Indication on display |
| Battery type | 1.5 V LR1 (2x) Alkaline |
| Unit auto switch off | 1 minute after last pulse |
