| 品牌 | ELEROL | 型号 | NC |
| 类型 | 机械式温度控制器 | 测量范围 | 0-60（℃） |
| 等级 | 1 | 测量误差 | 1（℃） |
| 开口尺寸 | 30（mm） | 安装型式 | 道轨试 |
| 输出信号 | 30（mA） | 工作电压 | 230（V） |
| 外形尺寸 | 60X33X43（mm） |
技术参数
电子恒温器是用来调节120-250VAC 的设备,开关可以转换加热或制冷接触器.
技术数据
开关温度公差 大约3K
连接类型 恒温双金属
接点类型 转换接触
接触电阻 < 10m0hm
产品使用期限 >100 000次
开关容量 250VAC,10(2)A
120VAC,15(2)A
DC 30W
EMC acc,to EN 55014-1-2,EN 61000-3-2,EN 61000-3-3
连接 2接点线径2.5mm.螺丝扭力0.8Nm
固定方式 截面为35mmDIN路轨，EN50022（或为出口过滤EF118系列）
外壳材质 塑料根据UL94 V-0，浅灰色
尺寸 60X33X43mm
重量 大约。40g
贴合位置 简易
操作/保持温度 -45到+80。C(-49到+176。F)
护等级 IP20
- Large setting range
- all size
- Simple to mount
- High switching performance
KTO 011: Thermostat (rmally closed); conta breaker for regulating heaters.
KTS 011: Thermostat (rmally open); conta maker for regulating of filter fans and heat exchangers or for switching signal devised when temperature limit has been exceeded.
| Switch temperature difference | 7K (&plun; 4K tolerance) |
| Sensor element | thermostatic bimetal |
| Conta te | snap-aion conta |
| Service life | > 100,000 cycles |
| Max. Switching capacity | 250VAC, 10 (2) A |
| 120VAC, 15 (2) A | |
| DC 30W | |
| Conneion | 2-pole terminal, clamping torque 0.5Nm max.: rigid wire 2.5mm² stranded wire (with wire end ferrule) 1.5mm² |
| Mounting | clip for 35mm DIN rail, EN60715 (or for exit filter EF 118 Series) |
| Casing | plastic according to UL94 V-0, light grey |
| Dimensions | 60 x 33 x 43mm |
| Weight | approx. 40g |
| Fitting position | variable |
| Operating / Storage temperature | -45 to +80°C (-49 to +176°F) |
| Proteion te | IP20 |
Prerequisite for a clean operation of your components is the right climate in your enclosure. The right climate can be attained by a temperature and moisture control system which is put in place. Thermostats and Hygrostats are used for the control of heaters, filter fans, heat exchangers and air conditioning equipment. They aivate when set temperature or humidity values are exceeded or have fallen below.
