塑胶熔融指数测定机

FH-8100    塑胶熔融指数测定机（塑料熔体流动速率机）
MELT FLOW INDEXER 

本机适用于熔融黏度较低之热塑性塑胶之品质管制。测定方法是在规定温度，荷重，及活塞于圆柱筒内位置等条件下，以计时测量方法测定熔融塑胶挤过一规定长度与直径之细孔模之速率，用来判别制程当中聚合物流率之均匀性。本机符合 ASTM，ISO，JIS，CNS 规范 A 法测定标准，可选择定时自动切料或按键切料。适用于流率在 0.15 至 50g/10 min 间之材料。
This tester covers measurement of the rate of extrusion of molten resins through a die of
specified length and diameter under prescribed conditions of temperature，load and piston
position in the barrel for measuring the flow rates of polymer in producing process。This
tester is complied with ASTM，ISO，JIS，CNS method A。The specimen can be cut off
automatically either by a presetting specified time interval or by manually pressing the
control key。It is applicable to test the material with a flow rates that fall between 0.15
and 50g / 10min。