BAJ52防爆应急灯(ⅡB、ⅡC)
适用范围 Application
适用于1区,2区危险场所。 Can be used in Zone 1 and Zone 2 dangerous places.
适用于ⅡA、ⅡB、ⅡC类爆炸性气体环境。 Can be used in IIA,IIB,IIC group explosive atmosphere.
可配装白炽灯、汞灯。 Suitable ofr incandesent lamp,mercury vapor laamp.
* 要求ⅡC类时请注明 *Please note if need II C group
型号含义 Model implication
产品特点 Features
铸铝合金外客,表面喷塑。 Diecasted aluminium alloy shell with plasticsprayed surface.
应急专用灯中正常照明灯和应急照明灯各自独立,适合安 Normal lamp and emergency lamp of the division type are respectively
装条件许可的场所;照明应急两用灯,正常照明和应急照明 suitable to the appropriate sites,but the dual-purpose for lighting and
共用一个灯体,光源独立。 emergency type share a same lampe body,moreover light source is independent.
内装免维护镍镉电池组,在正常供电下自动充电,事故断 Under the normal power-supplyingcondition,inner Nickel-Cadmium battery
电或停电时应急灯自动点亮。 can recharge automatically,so that the emergency lamp will turn on automatically
when the power ose because of accident or power failure.
钢管或电缆布线均可。 Suitable for both steelpe and cable wiring.
可根据用户要求设置试验按钮和指示灯具 It can be equipped with test button and indicator according to user's requirement.
符合GB3836-2000,IEC60079标准要求 Suitable for BG3836-2000,IEC60079 standard request.
主要技术参数 Main technical parameters
防爆标志 防护等级 电缆外径(¢,mm) 进线口螺纹(G")
Ex-mark Protection grade Cable's outside diameter Inlet's thread
--------------------------------------------------------------------------------
Exd II BT4 *Exde IICT4 IP54 10~14 3/4
--------------------------------------------------------------------------------
额定电压(v) Rated voltage 应急起动时间(s) 充电时间(h) 应急照明时间(min)
正常Normal 应急 Emergency Emergency starting time Recharging time Emergency lighting time
--------------------------------------------------------------------------------
AC220V/50Hz 6V/50Hz 0.3 24 90
配用光源 Supplied with lamps
正常照明 Normally luminating 应急照明 Emergency luminating
--------------------------------------------------------------------------------
125W自汞灯 Imcandescent mercury lamp 20W碘钨灯具 Iodin-tungsten lamp
200W白炽灯 Incandecent lamp
--------------------------------------------------------------------------------
E27灯座E27 Lamp socket GV5.3灯座GV5.3 Lamp socket
外形及安装举例 Outline and mounting example
照明应急两用式(A) 应急专用式(B) 吊杆式(g) Pendant
Dual-purpose for lighting and emergency Special purpose for emergency
壁式安装90度(b2) Bracket90C 壁式安装30度(b1) Bracket30C
BLK52防爆断路器(ⅡB、ⅡC) 防爆供应BLK52防爆断路器,BDZ52防爆断路器,防爆磁力起动器, 防爆配电箱,防爆防腐配电箱,防爆控制箱,防爆动力检修箱,防爆检修箱 ,防爆接线箱,防爆风机,防爆灯具,防爆管件等系列防爆产品..... 适用范围 1区、2区危险场所。 ⅡA、ⅡB类爆炸性气体环境。 型号含义 主要技术参数 型号 额定电压(V) 脱扣器额定电流(A) 防爆标志 电缆外径() 进线口螺纹() 防护等级 BLK52-32 1、2、3、4、6、10、16 12-17 1 20、25、32 BLK52-63 40、50、63 Exde II Bt6 13-26 1'/2、2 Ip54 BLK52-100/...
BXM(D)51防爆配电箱(IIB)(IIC) 主要技术参数 回路数 额定电压(V) 总开关电流(A) 支路电流(A) 防爆标志 防护等级 防腐等级 2,3,4,6,8 380 ≤400 ≤160 Exde II BT6(C) IP54(55) WF1 产品特点 适用于控制多台电动机,还可以照明或仪表配出电源.铸铝合金或钢板焊接 外壳,表面喷塑. 内装元件可根据用户要求选配.可在箱面或远控操作,也可两地操作. 具有过载,短路,失压保护.钢管或电缆布线均可. 符合GB12476,IEC61241标准要求. 订货须知 订货时请将支路数及各支路对应的电流,进出线口数量及相应的方向, 规格要求明确,如有总开关,请注明总开的电流大小或提供图纸. 产品结构 规格 内装元件 结构类型 备注 支路电流小于63A小型断路器交流接触器转换开采用模块式结构关,热继电器. 实现多回路自由组合. *可根据要求加装,电流表和互感器. 规格根...