E6H-CWZ1X 1000P/R
he diameter of the mating shaft must be 8 mm and 8 to
29.4N
轴向
4.9N
11 mm long from the mounting surface.
• The allowable displacement in the mating shaft must 0.05 mm in
the thrust direction.
• The mounting surface and shaft must be perpendicular to within
0.03 mm.
•When securing the Encoder, do not allow force to be applied to the
leaf spring (*).
•When securing the Encoder, use two M3 screws to secure the leaf
spring to the mounting surface.
• Use the Allen set screw provided with the hollow shaft to secure the
shaft. Use a tightening torq
作时:-10~+70℃ (90%RH以下) 保存时:-30~+85℃ (不结冰)
环境湿度范围
工作时、保存时:各90%RH以下(不结露)
绝缘电阻
电容器接地的除外
E6H-CWZ6C 200P/R ND WEIGHTS Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown. PERFORMANCE DATA Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of OMRON’s test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON Warranty and Limitations of Liability. ERRORS AND OMISSIONS The information in this document has been carefully checked and is bel 集电极开路输出 电压输出 集电极开路输出 * 4 输出容量 外加电压:DC35V以下 同步电流:35mA以下 残留电源:0.7V以下 (同步电流35mA时) 制输出电压:5V 负载电...
E6H-CWZ1X 720P/R he products, nor is it intended to imply that the uses listed may be suitable for the products: e, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this catalog. Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. Systems, machines, and equipment that could present a risk to life or property. Please know and observe all prohibitions of use applicable to the prod 、下降时间 1μσ以下 控制输出电压:5V 负载电阻:1kΩ 导线长度:500mm 1μσ以下 I0=-10mA IS=10mA 导线长度:500mm 起动扭矩 1.5m·N以下 ...