E6H-CWZ6C 100P/R
request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to the
products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product,
machine, system, or other application or use.
The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible
采用不需要耦合器的空心轴
小型、高分辨率的通用型
■对应宽范围电源电压DC5~24V
(集电极开路型)
■外径φ40,备有到3,600P/R的高分辨率
■厚度
■还备有线性驱动输出
(可延长
|
||||||||||||||||||||||||||||||||||
E6H-CWZ3X 2500P/R 100kHz 输出位相差 A相、B相的位相差 90°±45°(1/4T±1/8T) 输出上升、下降时间 1μσ以下 冲/旋转) 300、 360、 500、 600、 720、 800、 1,000、 1,024、 1,200、 1,500、 1,800、 2,000、 2,048、 2,500、 3,600 输出相 A相、 B相、 Z相 A相、A相、B相、B相、Z相、Z相 输出形式 集电极开路输出 电压输出 线性驱动器输出 *4 输出容量 施加电压 :DC35V以下 负载电流 :35mA以下 残留电压 :0.7V以下 (负载 击(耐久) 300m/s2 11ms X、Y、Z方向 各3次(除去对轴部的冲击) 保护结构 * 3 IEC规格 IP50 连接方式 导线引出式(标准导线长 500mm) 材质 外壳 铁 ...
E6H-CWZ1X 1000P/R 输出位相差 A相、B相的位相差 90°±45°(1/4T±1/8T) 输出上升、下降时间 1μσ以下 控制输出电压:5V 负载电阻: ■本体【外形尺寸图➜P.4】 电源电压 输出形式 分辨率 (脉冲/旋转) 型号 DC5~24V 集电极开 路输出 300、360、500、600、720、800、1,000、1,024 E6H-CWZ6C (分辨率) 0.5M 例:E6H-CWZ6C 300P/R 0.5M 1,200、1,500、1,800、2,000、2,048 2,500、3,600 DC5~12V 电压输出 300、360、500、600、720、800、1,000、1,024 E6H-CWZ3E (分辨率) 0.5M 例:E6H-CWZ3E 300P/R 0.5M 1,200、1,500、1,800、2,000、2,048 2,500、3,600 DC5~12V 线性驱动 器输出 300、360、500、600、720、800、1,000、1,024 E6H-CWZ3X (分辨率) 0.5M 例:E6H-CWZ3X 300P/R 0.5M 残留电源:0.7V以下 (同步电流35mA时) 输出电阻:1kΩ 同步电流 :30mA以下 残留电源:0.7V以下(同步...