E6C2-CWZ1X 3000P/R
ion: 1,000 m/s
2
3 times each in X, Y, and Z directions
Degree of protection IEC 60529 IP64, in-house standards: oilproof
Connection method Pre-wired Models (Standard cable length: 2 m)
Material Case: Zinc alloy, Main unit: Aluminum, Shaft: SUS420J2
Weight
(packed state)
Approx. 400 g
Accessories Instruction manual Note: Coupling, mounting bracket and hex-head spanner are sold sep
了避免感应噪声等,要尽量用最短距离配线。向集成电路输入时,特别需要注意。 6 电线延长时,因导体电阻及
0kHz
50kHz
100kHz
输出相位差
A相、B相的位相差90°±45° (1/4T±1/8T)
输出开始、
结束时间
1μs以下
(控制输出电压:5V负载电
阻1kΩ、导线长度:2m)
1μs以下
(导线长度:2m 负载
E6C2-CWZ6CH 30P/R Color Terminal Brown Power supply (+Vcc) Black Output phase A White Output phase B Orange Output phase Z Black/red stripes Output phase A White/red stripes Output phase B Orange/ red stripes Output phase Z Blue 0 V (common) 1. 接通电源时,流过约9A的浪涌电流。(时间:约0.3ms) *2. 线性驱动器输出是指按照RS-422A的数据传送回路。可通过双绞线电缆进行长距离传送。(AM26LS31相当品) *3. 电气响应转数由分辨率及响应频率决定。 dzsc/19/4094/19409482.JPG 因此,旋转超过响应转数时将无法跟上电器信号。 输出(REP)。它分为单路输出和双路输出两种。技术参数主要有每转脉冲数(几十个到几千个都有),和供电电压等。单路输出是指旋转编码器的输出是一组脉冲,而双路输出的旋转编码器输出两组A/B相位差90度的脉冲,通过这两组脉冲不仅可以测量转速
E6C2-CWZ5G 1000P/R The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible uses of the products, nor is it intended to imply that the uses listed may be suitable for the products: Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this catalog. Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. Systems, machines, and equipment that could present a risk to life or property. Please know and observe all prohibitions of use applicable to the products. NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED ...