E6C2-CWZ3E 40P/R
纪的最初10年为目标:以传感&控制为核心,作为国际化企业不断自我变革,争取成为对社会发展有贡献的企业。 健康而活跃的企业 健康的企业=现有事业与新规事业;效益与投资能够取得平衡的企业活跃的企业=各类人才聚集;能够创造性挑战性地开展工作的企业。
30N |
|||||
允许转速 | 6,000r/min | ||||
---|---|---|---|---|---|
保护回路 | 负载短路保护、电源反接保护 | - | |||
环境温度范围 | 工作时:-10~+70°C、保存时:-25 |
E6C2-CWZ3E 2000P/R Connection Spurious pulses may be generated when power is turned ON and OFF. Wait at least 0.1 s after turning ON the power to the Encoder before using the connected device, and stop using the connected device at least 0.1 s before turning OFF the power to the Encoder. Also, turn ON the powe 90度相位差(相对于一个周波为360度),将C、D信号反向,叠加在A、B两相上,可增强稳定信号;另每转输出一个Z相脉冲以代表零位参考位。 由于A、B两相相差90度,可通过比较A相在前还是B相在前,以判别编码器的正转 % 纹波(p-p) 5%以下 DC5V - 5%~12V + 10% 纹波(p-p) 5%以下 DC5V ± 5% 纹波(p-p) 5%以下 消耗电流 *1 80mA以下 100mA以下 160mA以下 分辨率 (脉冲/旋转) 10、20、30、40、50、 60、100、200
E6C2-CWZ3E 800P/R mA以下 残留电压:0.4V以下 (负载电流35mA时防油和防滴性能。防滴型产品不宜长期浸在水、油中,表面有水、油时应擦拭干净。 (2)振动 加在旋转编码器上的振动,往往会成为误脉冲发生的原因。因此,应对设置场所、安装场所加以注意。每转发生的脉冲数越多 A、B、Z三相联接,用于带参考位修正的位置测量。 A、A-,B、B-,Z、Z-连接,由于带有对称负信号0 m* or less. If the cable must be more than 2 m, use a Model with a Line-driver Output (max. length for linedriver output: 100 m). * Recommended Cable Conductor cross section: 0.2 mm Couplings E69-C06B E69-C68B E69-C610B E69-C06M Model with a Line-driver Output (max. length for linedriver output: 100 m). * Recommended Cable Conductor cross section