E6C2-CWZ1X 100P/R
d voltage: 30 VDC max.
6,000r/min
保护回路
负载短路保护、电源反接保护
-
环境温度范围
工作时:
Source current: 35 mA max.
Residual voltage: 0.4 V max.
(at source current of 35 mA)
Output resistance: 2 kΩ
Output current: 20 mA max.
Residual voltage: 0.4 V max.
(
的槽孔间隔越窄,越易受到振动的影响。在低速旋转或停止时,加在轴或本体上的振动使旋转槽圆盘抖动,可能会发生误脉冲。 (3)关于配线和连接 误配线,可能会损坏内部回路,故在配线时应充分注意: ① 配线
EE6C2-CWZ1X 1200P/R V 50/60Hz 1min 导线端整体与外壳间 振动(耐久) 10~500Hz 上下振幅 2mm或150m/s2 X、Y、Z各方向扫频11min/次 扫频3次 冲击(耐久) 1,000m/s2 X、Y、Z各 滴型产品不宜长期浸在水、油中,表面有水、油时应擦拭干净。 (2)振动 加在旋转编码器上的振动,往往会成为误脉冲发生的原因。因此,应对设置场所、安装场所加以注意。每转发生的脉冲数越多,旋转槽圆盘的槽ge: 35% to 85% (with no condensation) Insulation resistance 20 MΩ min. (at 500 VDC) between current-carrying parts and case Dielectric strength 500 VAC, 50/60 Hz for 1 min between current-carrying parts and case Vibration resistance Destruction: 10 to 500 Hz, 150 m/s 2 or 2-mm double amplitude for 11 min 3 times each in X, Y, and Z directions Shock resistance Destruction: 1,000 m/s 2 3 times ea
E6C2-CWZ1X 500P/R pply reverse polarity protection, Load short-circuit protection --- Ambient temperature range Operating: −10 to 70°C (with no V max. (at sink current of 35 mA) Applied voltage: 30 VDC max. Source current: 35 mA max. Residual voltage: 0.4 V max. (at source curre Ω、导线长度:2m) 1μs以下 (导线长度:2m 负载电流:10mA) 0.1μs以下 (导线长度:2m IO = -20mA、IS = 20mA) 起动转矩 10mN・m以下 惯性力矩 1 × 10-6kg·m2以下(6