MZ 1 系列 PTC热敏电阻器  MZ1 SERIES PTC THERMISTOR

    用于节能灯和电子镇流器延时启动For Time Delay of Lighting & Ballast

产品特性及应用FEATURES&APPLICATION

可靠性高，安全性和稳定性好，可频繁开关；

High reliability, good performance of safety and stability, and

Used in the frequent-switching.                                                                      

耐电压可高达600-1000VAC以上；

The withstanding voltage can reach to over 600-1000VAC.

开关通电100，000次以上，常温电阻不漂移；

Switching current can pass over 100,000 times: the resistance will not float.

应用于：节能灯、荧光灯电子镇流器、数字万用表等。

Applied in: energy-saving lamps, fluorescent electronic ballasts, and digital multi-meters.

Delay-Time PTC Thermistors for Lamps and Lanterns

   Features of Products:

With the development of global energy conservation, PTC Thermistors for electronic ballast softly starting has attracted more and more public attention. The traditional ballast starting, added high-pressure filament material suddenly without preheating, will take serious sputter and loss, and make the light turn black and scrap ahead of time. However, the electronic ballasts we have researched and developed, have been through preheating and high pressure. Lighting the tube, the filament material can only produce slight sputter, and can extend the light life span greatly. Tests by some authority organizations have indicated: Using PTC Thermistor to delay starting, can change the hard starting to pre-heating starting of the electronic ballasts and electronic power-saving lamps. The pre-heating time of wires can reach to 0.4-2.0 seconds. Such electronic ballasts can make the lamp service prolonged to more than 5 times.

Working Theories:

When the high frequency shaking return circuit has been put through, and because PTC is in a cold state and Rt is in a low state of resistance, its resistance value is far lower than that of C2, and the light pressure is smaller than that of starting it. Then current through C1, RT forms the return circuit-preheating filament. Meanwhile, PTC Thermistor is heated to above the Curie temperature, Rt heating temperature exceeding the switch temperature TSW and leaping to the state of high resistance too. Its resistance value is far higher than that of C2, and the current goes through C1, C2, forming the return circuit and causing LC resonance and producing high pressure and lighting the tube. Generally speaking, to delay the preheating time, we should select the relatively lower resistance, taller Tc point and bigger PTC Thermistor.

Main Applications

  Products are mainly applied in fluorescence lamp electronic ballasts, electronic power-saving lamps, and triggers.

深圳欧蓝达电子有限公司(以下简称“欧蓝达”)成立于1998年，是由华中理工大学、西安交通大学、天津大学高等院校的高技术人才进行合作，共同建立的高科技企业，是全球少数掌握热敏电阻核心技术的制造商之一，是一家从事电子元件的研究、开发、生产及应用的高新技术企业。 欧蓝达的技术力量及产品开发能力雄厚，内部拥有20余名具有博士、硕士学位以上的技术人员，并且先后引进了国外成套先进的生产设备及检测仪器。公司主要生产DY系列电子镇流器、节能灯延时启动用PTCR产品，彩色显像管用PTCR消磁回路元件，变压器、数字万用表、数字电度表RS485接口专用等电子仪表用PTCR、程控交换机、配线架、保安单元等通讯设备用过载保护PTCR元件、各种小型电源设备、充电器、触发器、计算机外设、，汽车电子、音响等过流保护用PTCR元器件，电冰箱、电机马达启动器，变频空调机启动用PTCR，暖风机、驱蚊器、空调、卷发器、等加热用PTCR元件等几十大类。 欧蓝达又于2004年，通过了瑞士SGS国际环保认证检测，即ROHS认证检测，2005年又相继通过了ISO9001,UL,CE,VED等国际认证。在2005年又引进国外先进的配方及工艺技术，进一步完善了本企业的核心技术，为新老客户提供了更好的服务平台。 目前，我们的产品不仅畅销国内而且远销东南亚、东欧、印度、西欧、北美等国际市场。 欧蓝达公司建立了一套完整的质量保证体系，公司本着“引领行业一流企业，质量，客户之上”为宗旨，竭诚为广大客户提供优质的产品质量，完善的技术支持，满意的跟踪服务，严抓质量管理，在市场竞争中不断发展和完善。