微电脑数码恒温式吸塑成型机(吸塑机)的特点:(Characteristic)
1. 温控系统：1000份数码式炉温控制（1000档），全时恒定功率，附电压补偿，当电压波动±20%内时，即补偿误差±1%。解决电压波动，所以炉温可长期保持稳定。数码控制，适合ISO9001操作体系。炉温可恒温设定；(Controls the system warm: 1000 digital type furnace temperature control (1000 grades), the entire time constant power, attaches the voltage compensation, when voltage hunting in ±20%, namely compensating errors ±1%. Solution voltage hunting, therefore the furnace temperature may maintain stable for a long time. The digital control, suits the ISO9001 operation system. The furnace temperature may the constant temperature hypothesis)
2. 冷风系统：风速大小可调，附刹车装置，适合不同厚薄片材。杀车装置、无震动及余风，增加生产速度;(Cold wind system: Wind speed size adjustable, attaches the brake system, suits the different thickness sheet material. Kills the vehicle installment, not to have the vibration and the remaining influence, increases the output velocity)
3. 数码式拉片：可任意改变速度及长度，拉片长短特别准确。按数字键即可改变拉片长度（1mm）;(The digital type pulls the piece: May change the speed and the length willfully, pulls the piece length to be specially accurate. Then changes according to the numeric keyboard pulls the piece length (1mm))
4. 美式合金铝轨道及筒链条，摩擦系数小及无震动;(The American alloy aluminum track and the tube chain link, the friction coefficient small and does not have the vibration)
5. 人机介面微电脑触摸屏控制系统，操作直观易用;(The man-machine interface microcomputer touchscreen control system, the operation direct-viewing easy to use)
6. 10.4寸触摸屏显示及操作.(10.4 inch touchscreen demonstrations and operation)
微电脑数码恒温式吸塑成型机(吸塑机)的技术参数： | Model/型号 | AHF-610 | AHF-710 | Forming Area
工作尺寸 | W510-660mm
L760-1118mm | W510-710mm
L760-1220mm | Max.stroke
底盘行程 | 370mm | Hoter control
热炉控制方式 | 1000-digit Thumb Whee1 Switch,constant
Temp Control 1000份数码恒温控制 | | Cooling/冷却 | BLower×2风机
Sprayer×8喷枪 | | Blower/冷风 | Variable Air Flow With Brake Control
可调风量大小及刹车装置 | Vacuum pump
真空泵 | 100M3/小时4HP | Material Driven
拉片 | Servo motor Driven Control For Speed&length
伺伏马达拉片，数码控制拉片长度及速度 | Power Consrmption
耗电量 | Max.29kw | Max.35kw | Dimensions/机身尺寸
L*W*H | L6800*W1480*H2700mm | L7200*W1550*h2700mm |
如设计所需以上吸塑机参数如有更改，不另行通知。
|
