价 格: | 面议 | |
是否提供加工定制: | 是 | |
品牌/商标: | 组创 | |
型号/规格: | 5*20 | |
种类: | 保险丝管 | |
用途: | 仪表 | |
体积: | 微型 | |
电压特性: | 低压 | |
形状: | 螺旋式 | |
熔断速度: | T/慢速 | |
执行标准: | 美标 | |
自动复位功能: | 无 | |
电压: | 250(V) | |
电流: | 25(A) | |
保持电流: | 15(A) | |
动作温度: | 0(℃) | |
温控范围: | 00(℃) |
CLEARING TIME | |||||||||
熔 断 时 限 | |||||||||
电流Ampere | 100% Rating | 135% Rating | 200% Rating | ||||||
时间Time | >4h | <1h | <120s | ||||||
电压Volfage | 250v | 250v | 250v | ||||||
5.机械特性Mechanical Properties:Terminal Conncctions&Lead Solderability | |||||||||
乃经下述三项实验证明 | |||||||||
5.1拉力强度Terminal Strength:当施加轴力向拉力1.1磅于两端导线(或套盖)5分钟后, | |||||||||
无松动或损坏现象发生。 | |||||||||
5.1Leads and/or caps are soldcred(adhcred)to withstand axial pulling force1.1pounds5 | |||||||||
min without loosening ou any harfulness to firmly arlachment | |||||||||
5.2 回转强试Torsion Strength: | |||||||||
| |||||||||
After being subjecteedd to720 g/cmtorsion go one cap while te othe terminal fixed,no any | |||||||||
damage or loosmning resulted | |||||||||
| |||||||||
发生损坏 | |||||||||
One lead bent through90o,the body be clamped and rotated through 360o at a rate or 5 sec | |||||||||
about the original axis,Vophisical damage to leads or connections twsulted after 3 successive | |||||||||
-altematero-tations. | |||||||||
5.3 弯折强度Bending Strength:导线经过两次反方向之弯折后(弯折90度同折回原位谓之一次 | |||||||||
弯折)不发生损坏 | |||||||||
After two bends of opposite ditections (bending through an angle of90oand back is detined as | |||||||||
one bond)of lead,no damage are to be visualized. |
玻 管 式 保 险 丝
Fuscs for Instrumcnt,Power and Telephone (Nonindicating)
1.适应范围:本标准试用于保护仪器,各类电子电器元件,电源供应器和电话机用之玻管式熔断保险丝
1.Available Ramge:For protccting instrurucnts,all electron or electonal,power supplics and telephone sets.
2.形状及尺寸如下图,单位:mm
2.Shape&size as following illustrations,unit:mm
2.1构造形状Structurc&Shape如上图 1as shown in ligure above
5mm X 20mm formall called
2.2额定电压 Rated Voltage: 250V AC. 250V
2.2额定电流 Ratde Current: 150MA-15A 慢熔
NO Parr Name 部 名 Material 材料 Size 尺寸
A Ferrule Cap 套合(铜帽) Capper(inckel plaring)铜(镀镍) 5.16*5.25
B Tube 铜管 "Soda Glass (transparenl)
石灰玻璃(透明)" 4.7x19.1mm
C "Fuse Soluble Eloment
可熔体" Siler Alloy 银合金线
D Adhesive 粘胶 "Resin &Hardening Agent
树脂与硬剂"
E Solder 焊锡 "Naught Lead Tin
无铅锡"
F Pig 引线 Capper Plaring Tin 铜镀锡 0.65x38x5.85
3.材 料:
3.Material
3.1 玻管本体:透明玻璃管可清晰见到内部之熔线但不可破裂或变形
3.1 Glass tube:Transparenr glass in which the fuse is clesr and pwspcctable.No breaking or deformation
is allowed.
3.2 两端铜帽:须以导电率良好之黄铜底材料。
3.2 Two brass end caps Made of brass of good conductiviry.
3.3 铜帽处理:铜帽部分镀镍
标示若加"3"者,表示须镀镍。
3.3 Coating of brass caps Plaring the surfacc with nickel If the indicarion is added with"s",it needs
to be plard with silver.
3.4 铜盖强度:铜盖和玻璃本体间的扭力最小720g-cm.
3.4 Slrcmgth of brass caps The minimum tortion between brass caps and glass tube is 720g-cm
4.电气特性:
4.Charactcristics of Electrical Appliancos
4.1 负载容量:额定电流测100%,能继续通电无任何熔化现象。
4.1 Loading Capacity The Listed Electrical.(Included) add 100%for following,and it's available to let
Current Kurrcnt Keep on flowinng without any melding
4.2 温度特性:进行上项测试1.5 小时,后继续维持原加之电流,每隔十分钟测试一次,继续测试
三次,温度不得升高,若使用热偶式测量方法,(Thermometer method)则本体温度在70℃以下
若使用温度计测量方法(Thermometer method)则在50℃以下。
4.2 Temperature proceed: the prccedingtest for1.5 hours,keep testing iteith the original current
every 10 minutes.Continue to test it for 3 times .The temperature is not allowed to be higher
产品用途:广泛用于电源供应器、开关电源、电脑、充电器、电话机、家用电器、通讯产品、各类仪器及类电子电器元件、电机产品和各类小家电电器产品,是电器产品不可缺少的安全配件.产品尺寸:2.4×7mm、3×10mm、4×8mm、4×11mm、4.5×15mm、8×8.5mm、5.2×20mm、6×25mm、6×30mm、6.35×31.75mm、10×38mm.3.6x10mm电流范围:0.05A~30A电器特性:快断型、慢断型、中速断型、超慢断型、抗雷击型、高压型。质量认证:CCC、UL、CSA、VDE、BSI、EK、CQC、PSE、SEMKO.CUL等。额定电压:125V、250V、350V材 料:环保料,符合ROHS要求公司网址: www.wxfuse.com电子邮箱: sales@wxfuse.com贸易通: http://wxzucang.cn.alibaba.com/电话: 0510-85319106传真: 0510-85319100手机: 13771533196QQ : 1019314885dzsc/19/0496/19049659.jpgdzsc/19/0496/19049659.jpgdzsc/19/0496/19049659.jpgdzsc/19/0496/19049659.jpgdzsc/19/0496/19049659.jpgdzsc/19/0496/19049659.jpgdzsc/19/0496/19049659.jpg"
2.1构造形状Structurc&Shape如上图1asshown in ligure above 6.35mm X30mm formall called 2.2额定电压Rated Voltage: 250V AC. 250V 2.2额定电流Ratde Current: AC 2A 3AF4A-F5A NOParr Name部名Material 材料Size尺寸AFerrule Cap套合(铜帽)Capper(inckel plaring)铜(镀镍)6.25*6.35BTube铜管Soda Glass (transparenl)石灰玻璃(透明)5.7x29.1mmCFuse Soluble Eloment可熔体Siler Alloy银合金线DAdhesive粘胶Resin &Hardening Agent树脂与硬剂ESolder焊锡Naught Lead Tin无铅锡FPig引线Capper Plaring Tin铜镀锡0.8*6.81*30GH 3.材 料: 3.Material 3.1 玻管本体:透明玻璃管可清晰见到内部之熔线但不可破裂或变形 3.1 Glass tube:Transparenr glass in which the fuse is clesr and pwspcctable.No breaking or deformation is allowed.3.2 两端铜帽:须以导电率良好之黄铜底材料。3.2 Two brass e...