价 格: | 面议 | |
额定电压: | 100(V) | |
功率特性: | 大功率 | |
调节方式: | 固定 | |
标称容量: | 0.001-1.0(uF) | |
频率特性: | 低频 | |
应用范围: | 耦合 | |
型号: | CL21X | |
温度系数: | -40+110°C | |
允许偏差: | ±10(%) | |
引线类型: | 同向引出线 | |
等效串联电阻(ESR): | 详细参考规格书(mΩ) | |
品牌: | 塑镕 | |
耐压值: | 3000(V) | |
损耗: | 0.01 | |
绝缘电阻: | 详细参考规格书(mΩ) | |
介质材料: | 有机薄膜 | |
外形: | 方块状 |
金属化聚酯膜超小型电容器CL21X
采用标准
GB7332(IEC384-2)
结构
介质:聚酯膜
电极:金属真空蒸发层(铝)
封装:阻燃环氧树脂(UL94 V-0)
典型应用
直流及低脉冲场合。如:低频滤波、隔直流及旁路和耦合等。
特点
体积很小,有良好自愈性;外观一致性好;高可靠性。
Metallized Polyester Film Capacitors-Mini Shape CL21X
Reference Standard
GB7332(IEC384-2)
Structures
Material: Polyester film
Electrode:Metallized Vacuum Evaporated Layer(Aluminum)
Enveloped with flame-retardant epoxide resin(UL94V-0)
Using area
DC and Low Pulse Circuit.E.g.Low Frequency Filter,Blocking of DC,By-pass and coupling circuit.
Features:
Small Size with good self-healing effect.Well outer looking with high reliable using.
1) 结构:MPX-X2是以聚丙烯膜为介质,金属真空蒸发层(锌铝复合加厚型)为电极,用阻燃环氧树脂和阻燃PBT塑壳封装,以镀锡铜包钢线为引脚,常规脚长为15mm,也可根据客户要求用长脚长或者切成短脚。(2) 应用范围:跨线,抑制突波,交流等场合。比如打字机,显示器,监控器,混合器,风扇,咖啡研磨机,排风机等(3) 特征:体积小,有良好治愈性,抗湿性强,耐过电压性能优良。(4) 技术参数:气候条件:-40~ 100℃额定电压:250VAC/280VAC容量范围:0.0022uF—4.7uF容量偏差:J(±5%),K(±10%)耐电压DC:4.3UR或者2000VDC,极壳2000VAC(2S)损耗角正切:<1.0 uF时为≤0.0015(10KHz);≥1.0 uF时为 ≤0.001(1KHz)绝缘电阻:≥30000MΩ(C≤0.33uF); ≥10000S(MΩ·uF)(C>0.33 uF)(5) 采用标准
采用标准UL1283EN60384-14GB/T14472-1998结构介质:聚丙烯膜电极:金属真空蒸发层外壳:阻燃PBT塑壳(UL94 V-0)封装:阻燃环氧树脂(UL94 V-0)引脚:镀锡铜包钢线典型应用跨线、抑制突波、交流场合等。特点体积小,有良好自愈性,抗湿性强,耐过电压性能优良。Interferon Suppression Capacitors,X1 ClassReference StandardUL1283EN60384-14GB/T14472-1998Material: Polypropylene filmElectrode: Metallized Vacuum Evaporated LayerOut Box: PBT flame-retardant plastic box(UL94 V-0)Encapsulation: Flame-retardant epoxide resinPin: With copper-clad steel leadsUsing areaAcross-the-line,Inhibit the Surge,AC circuits,Antenna-coupling and Line-bypass etc.FeaturesSmall Size with good self-healing effect.Have strong moisture resistance and well proof voltage