让卖家找上门
发布询价>>
您所在的位置:仪器仪表网> 电子元器件>供节能灯预热启动PTC热敏电阻器

供节能灯预热启动PTC热敏电阻器

价 格: 0.08
加工定制:
品牌:XEC
型号:PTC热敏电阻 MZ 3系列
种类:热敏
性能:通用
材料:无机实心
制作工艺:合成式
外形:圆柱形
标称阻值:R25:501-500Ω
允许偏差:±20%
温度系数:PTC
额定功率:5(W)
功率特性:中功率
频率特性:中频
营销方式:厂家直销
产品性质:热销

PTC MZ 3 系列

   (PTC MZ 3 series)

 

产品简介    Introduction

        MZ3系列PTC热敏电阻应用于各种荧光灯电子镇流器,电子节能灯中,不必改动线路将产品直接跨接在灯管的谐振电容两端,可以改变电子镇流器,电子节能灯的硬启动为预热启动,灯丝的预热时间达0.4-2.0秒,可延长灯管寿命4倍以上。
     
        Mz31 series of PTC Thermistor are applicable tovarious types of fluorescent lamp,electronic ballast and electronic energy-saving lamp.The PTC can be connected across the lamp resonator without changing the circuits. It can change hard start of the ballast and electronic energy-saving lamp to
        Preheated start and the preheating time of the filament can come up to 0.4-2 seconds,which will extend the service life of the fiuorescent tube by over 4 times.

应用原理    Operating principle

       应用PTC热敏电阻实现预热启动如图2所示:刚接通开关时,Rt处于常温态,其阻值远远低于C2阻值,电流通过C1,Rt形成回路预热灯丝。约0。4-2秒后,Rt焦耳热温度超过开关Tc跃入高阻态,其阻值远远高于C2阻搞,电流通过C1,C2形成回路导致L谐振,产生高压点亮灯管.
       对某一特定的电子镇流器,电子节能灯而言,所选用的PTC阻值越大,体积越小,开关温度越低,其功耗就越小,预热时间也越短;反之功耗就越大,预热时间也越长.
       He application of the PTC thermistor to achieve preheated start is as follows:lmmediately after power is switched on,Rt is in normal temperature state and its resistance is far lower than the C2 resistance.The current through C1 and Rt forms a return circuit to preheat the filament.After about 0.4-2 seconds,Rt joule heat temperature exceeds Curie point T c and skips into high resistance state of far higher than C2 resistance .The current passes through C1 and C2to form a return circuit,which causes L resonance and porduces high voltage to light the fluorescent tube.
       To a certain electronic ballast,energy saving lights,higher PTC thermistor resistance,smaller PTC ceramic boby dimension,lower switch temperature,will lead to its lower powerconsumption,shorter preheating time,conversely,larger power consumption,long preheating time

产品型号说明      Marking of Part Number

dzsc/18/9842/18984259.jpg

①   系列:用于电子镇流器,节能灯预热启动PTC热敏电阻器
       Series:PTC thermistor for electronic ballast or energy-saving lamp starter
②   类别:A-通用型 B-复合型
      Type: A-general B-compound
③   芯片尺寸:05-5mm
      chip size: 05-5mm
④   居里温度类别TC: F-75℃
       Switch temperature:F-75℃
⑤   标称阻值R25:501-500Ω
      R25resistance:501-500Ω
⑥   R25允差范围:K±10%  M±20%  H±25%  N±30%
      Resistance tolerance: K±10%  M±20%  H±25%  N±30%
⑦   电压:700-700V
      Max Voltage:700-700V
⑧   引线型状:S-直脚 A-轴弯 U-内弯
      Wire shape: S-Straight A-Axis formed U-In-formed
⑨   芯片尺寸:5D-5mm
      chip size:5D-5mm
⑩   压敏电压:121-120V(DC)
      Varistor Voltage:121-120V(DC)

dzsc/18/9842/18984259.jpg

dzsc/18/9842/18984259.jpgdzsc/18/9842/18984259.jpg

上海鑫盛泰电子有限公司
公司信息未核实
  • 所属城市:上海 上海市
  • [联系时请说明来自维库仪器仪表网]
  • 联系人: 颜迅
  • 电话:8602167700988;67700989
  • 传真:8602167700954
  • 手机:0
  • QQ :
公司相关产品

PTC过流保护热敏电阻

信息内容:

MZ系列热敏电阻器包括消磁电阻,节能灯启动用热敏电阻,电源保护用限流电阻等.公司生产销售以下产品: .一、敏感电阻:PTC消磁电阻、正温度系数热敏电阻器(PTC)、负温度系数热敏电阻器(NTC)、二、FFC柔性扁平电缆三、跨接线:跳线(JW)、零欧姆电阻(ZO)、四、固定电阻:高压电阻器(MGR85)、金属玻璃釉电阻器(MGR)、金属氧化膜固定电阻器(RS)、贴片电阻器(CR)、碳膜固定电阻器(RD)、金属膜固定电阻器(RN)、绕线固定电阻器(RW)、绕线无感固定电阻器(NRW)、绕线熔断固定电阻器(FRW)、金属膜熔断固定电阻器(RF)、片状高压电阻器(MGR86) 、水泥电阻器(RQ)、金属片无式感电阻器(MPR)、温度保险丝水泥电阻器 (WRX)、功率瓷管式电阻器( PFAS)、铝外壳绕线电阻器(ARW)、排列电阻器(RA)、等。

详细内容>>

立式编带电阻

信息内容:

1.优异不燃性涂装 2.不良及恶劣环境也能稳定运作 3.电器性能稳定 4.超低或超高阻值也能特别提供 5.阻值范围±5% 公司生产销售以下产品: .一、敏感电阻:PTC消磁电阻、正温度系数热敏电阻器(PTC)、负温度系数热敏电阻器(NTC)、二、FFC柔性扁平电缆三、跨接线:跳线(JW)、零欧姆电阻(ZO)、四、固定电阻:高压电阻器(MGR85)、金属玻璃釉电阻器(MGR)、金属氧化膜固定电阻器(RS)、贴片电阻器(CR)、碳膜固定电阻器(RD)、金属膜固定电阻器(RN)、绕线固定电阻器(RW)、绕线无感固定电阻器(NRW)、绕线熔断固定电阻器(FRW)、金属膜熔断固定电阻器(RF)、片状高压电阻器(MGR86) 、水泥电阻器(RQ)、金属片无式感电阻器(MPR)、温度保险丝水泥电阻器 (WRX)、功率瓷管式电阻器( PFAS)、铝外壳绕线电阻器(ARW)、排列电阻器(RA)、等。

详细内容>>

相关产品