DAIN安规电容100元/KPCS
| 价 格： | 100.00 | |
| 品牌/商标： | DAIN | |
| 型号/规格： | 125K/275VAC P=22.5MM | |
| 介质材料： | 有机薄膜 | |
| 应用范围： | 滤波 | |
| 外形： | 方块状 | |
| 调节方式： | 固定 | |
| 引线类型： | 同向引出线 | |
| 允许偏差： | ±10（%） | |
| 等效串联电阻(ESR)： | /（mΩ） | |
| 标称容量： | 1.08-1.32（uF） | |
| 损耗： | / | |
| 额定电压： | 275（V） | |
| 绝缘电阻： | /（mΩ） | |
| 温度系数： | / |
| APPLICATION FOR APPROVAL | ||||||||
| 1.Item: Metallized Polypropylene Capacitor | ||||||||
| 2.Type: MPX Series. | ||||||||
| 3.Specification. | ||||||||
| a.Temperature Range -40°C ~ 110°C | ||||||||
| b.Capacitance. 0.001uF~1.0uF | ||||||||
| c.Capacitance Tolerance. K(±10%)M(±20%) | ||||||||
| d.R.V. 275VAC | ||||||||
| e.Dimension. Refer to standard product list (Attached Pages). | ||||||||
| 4.Performance Test | ||||||||
| ARTICLE | APPLICATION | PERFORMANCE | TEST METHOD | |||||
| 1 | Appearance | No defect | Eye measurement or by | |||||
| dial gauge | ||||||||
| (Between terminals) | Add a D.C.test Voltage | |||||||
| No defect,Self healable breakdown | of 1200 V rated W.V for | |||||||
| is not counted | 60 sec | |||||||
| 2 | Dielectric strength | The initial changing and | ||||||
| discharging currents at | ||||||||
| testing voltage shall not | ||||||||
| exceed 1A | ||||||||
| Between body and terminal | Add a D.C.test Voltage | |||||||
| no defect | of 1200V rated W.V.for | |||||||
| 60sec | ||||||||
| Test voltage: | ||||||||
| C≤0.33uF :15000MΩMIN | ||||||||
| 275VAC for rated voltage 275VAC | ||||||||
| Insulation | C〉0.33uF :5000MΩ.uf MIN | |||||||
| 3 | Resistance | |||||||
| 4 | Capacitance | Within the Specification. | Measured with frequency | |||||
| 5 | Dissipation Factor | The tangent of loss amgle:≤0.1% | 1KHZ and 25°C | |||||
| APPLICATION FOR APPROVAL | ||||||||
| ARTICLE | APPLICATION | PERFORMANCE | TEST METHOD | |||||
| 6 | Tensile strength | 1)No visible damage | Tensile strength:load:1.0kg. | |||||
| 2)No breaking or looseing of | Duration of load application: | |||||||
| terminal | 60±5sec. | |||||||
| Bending strength:load:0.5kg. | ||||||||
| The number of testing time:twice | ||||||||
| 1)No open and short circuit | Variable frequency cycle: | |||||||
| 7 | Vibration | happened . | 10~55~10Hz/min | |||||
| 2)No damage in element junction | Amplitude 1.5 mm;Direction | |||||||
| and appearance | x,y,z;each direction 2 hours. | |||||||
| At least 75% of the circumference | Solder temperature:245±5℃ | |||||||
| 8 | Solderability | of the immersed shall be covered | Dipping time:2±0.5 sec | |||||
| with new solder. | Dipping depth:2±0.8mm from | |||||||
| the root of the terminal. | ||||||||
| 1)No visible damage; | In 260±5°C solder bath | |||||||
| 9 | Resistance to | 2)Capacitance change:within ±5% | for 5 sec | |||||
| solding heat | of initial value. | |||||||
| 1)Capacitance change:ΔC/C≤5%; | Test in constant thermostatic | |||||||
| 10 | Heat resistance | 2)The tangent of loss angle: | oven after 2 hours deposit | |||||
| changed within 150% of initial | reached temperatureequilibrum | |||||||
| value at 1Khz | 85±2℃thermostatic oven. | |||||||
| 3)IR≥30% of initial value | ||||||||
| 1)Capacitance change:ΔC/C≤5%; | Test in constant thermostatic | |||||||
| 11 | Cold resistance | 2)The tangent of loss angle: | after 2 hours deposit | |||||
| changed within 150% of initial | reached temperature equilibrum | |||||||
| value at 1Khz | -40±2℃thermostatic oven. | |||||||
| 1）Appearance: no defect; | Temp.:40°C; | |||||||
| 12 | Moisture resistance | 2）Test voltage:No defect,self | Humidity:R.H 90%-95% | |||||
| healable ability is not destoryed; | Add W.V for 240±8 hours | |||||||
| 3）Insulation resistance:≥30% of | then keep the room temp. | |||||||
| initial value; | 10 hours. | |||||||
| 4）The tangent of loss angle:change | ||||||||
| within 150% of initial value; | ||||||||
| 5）Cap,change:ΔC/C≤5% | ||||||||
| 1)Appearance:no defect; | Add 140% of W.V. | |||||||
| 13 | Moisture | 2)Insulation resistance:≥50% | 85±3°C in Chamber for | |||||
| resistance | of initial value; | then keep .Under standerd | ||||||
| loading | 3)The tangent of loss angle: | 1000H condition 2 hours. | ||||||
| 4)change within 150% of initial | ||||||||
| value;Cap,change:ΔC/C≤5% | ||||||||
- 所属城市：广东 东莞
- [联系时请说明来自维库仪器仪表网]
- 联系人： 薛强
- 电话：0769-82802469
- 传真：0769-83861559
- 手机：13662958961
- QQ ：
超低价供应高品质X2安规电容器
信息内容：为无感结构，用金属化聚丙烯膜/聚脂膜作电介质/电极绕制而成，导线采用镀锡铜包钢线，使用环氧树脂密封在塑料壳内。特点：塑料外壳封装（黄色），外观一致性好高频损耗小，能承载较大电流绝缘电阻高，自愈性好，寿命长适用天电源跨线降噪抑制干扰电路，及其他交流场合 气候类别：40/100/21额定电压：275VAC容量范围：0.0022UF -4.7UF容量误差： -10%耐电压：4.3倍*额定电压（5S）损耗角正切：0.1% max at 1KHz 25°C绝缘电阻：C≤0.33uF , IR≥15000MΩC〉0.33uF ,IR≥5000MΩ/ uF 广东电容厂制造电容器，欢迎咨询：www.kns0769.com"
扁圆轴向穿心音响分频日光灯用电容 334K/250VCBB20金属膜电容
信息内容：东莞市科尼盛电子有限公司坚持顾客至上，绿色环保，品质的经营理念。Dong Guan Ke Ni Sheng Electronic CO.,LTD）adhere to the customer first, green environmental protection, quality first business philosophy. 金属化聚丙烯膜电容器CBB20(PPN)系列的特点体积小重量轻，容量稳定性好，治愈性能优异，高频损耗小，广泛用于高频,直流,交流和脉冲电路中。Metallized polypropylene film capacitor CBB20 (PPN) series features of small volume and light weight, good capacitance stability, curing performance, small loss at high frequency, widely used in high frequency, DC, AC and pulse circuits.224K/250V日光灯专用电容圆扁轴向穿心音响分频CBB20金属膜电容 东莞市科尼盛电子有限公司 英文名: Dong Guan Ke Ni Sheng Electronic CO.,LTD地址：广东省东莞市东坑镇黄麻岭工业园凤凰路南4号电话: 0769-33287982 33287983 33256671 33256670 传真: 0769-81017460 83861559
