B78408A1246A003 EPCOS STOCK现货供应详细信息.库存货源资料.现货专家.产品定义： EPCOS现货库存询价热线0 755 8399 5017或请电邮kevin@parkeli.com●Parkeli.com●你可靠的EPCOS STOCK现货现调专家！

Technical data

■   Double-aperture transformer

■   Recommended frequency range:1800 MHz to 2400 MHz

■   Operating temperature: −40 °C to 85 °C

■   Weight: approx. 105 mg

Feature

■   RoHS-compatible

Marking

■   No marking on components

■   Minimum data on reel: Manufacturer, ordering code, quantity, date code

Delivery mode and packing unit

■   12-mm blister tape to IEC 60286-3, wound on 330-mm ∅ reel

■   Packing unit: 2100 pcs./reel

Insertion loss

Measurement instrument: Network analyzer

Impedance: 50 ?

Values specified at 25 °C
 

■   Please note the recommendations in our Inductors data book (latest edition) and in the data sheets.

– Particular attention should be paid to the derating curves given there.

– The soldering conditions should also be observed. Temperatures quoted in relation to wave soldering refer to the pin, not the housing.

■   If the components are to be washed varnished it is necessary to check whether the washing varnish agent that is used has a negative effect on the wire insulation, any plastics that are used, or on glued  joints.  In particular, it is possible for washing varnish agent residues to have a negative effect in the long-term on wire insulation.

■   The following points must be observed if the components are potted in customer applications:

– Many potting materials shrink as they harden. They therefore exert a pressure on the plastic housing or core. This pressure can have a deleterious effect on electrical properties, and in extreme cases can damage the core or plastic housing mechanically.

– It is necessary  to check whether the potting material used attacks or destroys the wire insulation, plastics or glue.

– The effect of the potting material can change the high-frequency behaviour of the components.

■   Ferrites are sensitive to direct impact. This can cause the core material to flake, or lead to breakage of the core.

■   Even for customer-specific products, conclusive validation of the component in the circuit can only be carried out by the customer.

产品图片：dzsc/18/9434/18943434.jpg

EPCOS STOCK现货供应详细信息.库存货源资料.现货专家
产品定义：B78408A1246A003 EPCOS现货库存询价热线0 755 8399 5017或请电邮kevin@parkeli.com●Parkeli.com●你可靠的EPCOS STOCK现

货现调专家！

The following applies to all products named in this publication:

1. Some parts of this publication contain statements about the suitability of our products for certain  areas  of  application.  These  statements  are  based  on  our  knowledge  of  typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly  point  out that such  statements  cannot  be regarded  as  binding statements about the suitability of our products for a particular customer application.

As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application.

2. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic  component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component.

3. The warnings, cautions and product-specific notes must be observed.

4. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because  they are classed as hazardous). Useful information on this will be found in our Material Data  Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices.

5. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order.

We  also  reserve   the  right  to  discontinue   production   and  delivery   of  products. Consequently, we cannot guarantee that all products named in this publication will always be available.

The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products.

6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association (ZVEI).

7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSMP, CSSP, CTVS, DSSP, MiniBlue, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, SIFERRIT, SIFI, SIKOREL, SilverCap,   SIMDAD, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be

found on the Internet atwww.epcos.com/trademarks.

产品图片：dzsc/18/9434/18943434.jpg

EPCOS STOCK现货供应详细信息.库存货源资料.现货专家
产品定义：B78408A1246A003 EPCOS现货库存询价热线0 755 8399 5017或请电邮kevin@parkeli.com●Parkeli.com●你可靠的EPCOS STOCK现货现调专家！

深圳市百安富科技有限公司 位于广东 深圳市福田区。公司秉承“顾客至上，锐意进取”的经营理念，坚持“客户”的原则为广大客户提供优质的服务。欢迎惠顾！