| 价 格: | 1.00 | |
| 加工定制: | 是 | |
| 品牌: | 登发 | |
| 型号: | 1.0B | |
| 应用范围: | 电缆 | |
| 种类: | 发光二极管 | |
| 接口类型: | D-SUB(VGA) | |
| 支持卡数: | 单卡 | |
| 读卡类型: | CF | |
| 形状: | 条形 | |
| 制作工艺: | 熔接 | |
| 特性: | 防潮 | |
| 工作频率: | 低频 | |
| 接触件材质: | 磷青铜 | |
| 绝缘体材质: | 无 | |
| 芯数: | 无 | |
| 针数: | N | |
| 线长: | 无(mm) |
FFC/FPC(扁平电缆连接器)
型号:1.0B
规格:1.0B-nPW(双面接触无扣)
1.0B-nPWB (卧贴)
1.0B-nPLB (立贴正脚)
1.0B-nPLBF (立贴反脚)
生产P位:4~40P
dzsc/18/9132/18913262.jpg
dzsc/18/9132/18913262.jpg
dzsc/18/9132/18913262.jpg
NO | 测试项目 Test Item | 试验方法及条件 (Test Condition & Method) | 规格Standard
|
6.1 | 接触阻抗contact impedance | FFC与导体之间的接触电阻(Measured the resistance of mated FFC )
| 30毫欧以下 (below 30mΩ) |
6.2 | 绝缘阻抗insulation impedance | 在端子之间和端子与壳之间加DC500V条件下持续1分钟测量among terminals or between terminal and shell, under condition of DC500V ,last 1min to test | 1000兆欧以上 ( above100MΩ) |
6.3 | 耐电压disruptive test | 在端子之间和端子与壳之间加AC 500V(50H或60H)条件下持续1分钟测量among terminals or between terminals and shell, under condition of AC 500V(50H or 60H),last 1min to test | 无击穿现象出现 ( without disruptive ) |
dzsc/18/9226/18922676.jpg 一、此规格适用于“0.5-1.0-1.25间距柔性扁平电缆连接器”系列This specification is 0.5-1.0-1.25 mm pitch FPC/FFC connector series. 二、允许电压/电流: 50V 0.5ARated Voltage /Rated Voltage : 50V 0.5A 三、构造(Struction)3.1形状,尺寸根据图纸确定( Form, dimension according to the drawing).3.2各部分无生锈、裂痕、电镀不良现象(Without rust and oxydation、crack、defective electric plating in all parts) 四、温度范围(Temperature range):-25°C~85°C; 五、材质( Material)5.1塑胶:NYLON Plastic (part: PA46)5.2端子:磷青铜( Terminal:Phosphor Bronve);5.3焊片:磷青铜(Soledr tab :Phosphor Bronve)5.4锁条:PPS(Slider:Phosphor Bronve)
FFC/FPC(扁平电缆连接器) 型号:1.0E规格:1.0E-nPWS (弯插上接正脚) 1.0E-nPWSF(弯插上接反脚) 1.0E-nPWX (弯插下接正脚) 1.0E-nPWXF (弯插下接反脚)生产P位:4P-40P dzsc/18/9360/18936094.jpgdzsc/18/9360/18936094.jpgdzsc/18/9360/18936094.jpg 一、规格适用于“0.5-1.0-1.25间距柔性扁平电缆连接器”系列This specification is 0.5-1.0-1.25 mm pitch FPC/FFC connector series. 二、允许电压/电流: 50V 0.5ARated Voltage /Rated Voltage : 50V 0.5A 三、构造(Struction)3.1形状,尺寸根据图纸确定( Form, dimension according to the drawing).3.2各部分无生锈、裂痕、电镀不良现象(Without rust and oxydation、crack、defective electric plating in all parts) 四、温度范围(Temperature range):-25°C~85°C; 五、材质( Material)5.1塑胶:NYLON Plastic (part: PA46)5.2端子:磷青铜( Terminal:Phosphor Bronve);5.3焊片:磷青铜(Soledr tab :Phosphor Bronve)5.4锁条:PPS(Slider:Phosphor Bronve)