| 价 格: | 面议 | |
| 类型: | LED照明灯 | |
| 型号: | 5mm白光圆头无边 | |
| 外径尺寸: | 5(mm) | |
| 材质: | 环氧树脂 | |
| LED颜色: | 红、黄、蓝、绿、白、橙、紫 | |
| 供电电压: | 3.0-3.4(V) | |
| 功率: | 0.06(W) | |
| 用途: | 装饰灯、照明灯、手电筒、验钞灯、指示灯等 |
亮度:7000-9000mcd 9000-11000mcd 11000-13000mcd 13000-15000mcd 15000-17000mcd 18000mcd以上!
IV:7000-9000lm 9000-10000lm 10000-11000lm 11000-13000lm 13000-15000lm 15000-17000lm 18000以上亮度。
产品型号:351WD12MFN00光 通:6-7lm光 强:1900-2200mcd电 压:3.0-3.2-3.4V光源颜色:暖白色系色温:色温可定制,也可看样定做!(只限暖白),因为芯片波段偏低! 光 衰:1000H常温下小于4% 请认准我们的外包装和标签!测试环境(远光的测试仪和星光的老化仪)!贴片卷盘(3528 2K一卷)SolderingReflow SolderingHand Soldering Lead SolderLead – free Solder Pre-heat120~150℃180~200℃Temperature350℃Max.Pre-heat time120sec. Max.120sec. Max.Soldering time3sec. Max.Peak temperature240℃Max.260℃Max. (one time only)Soldering time10sec. Max.10sec. Max. Conditionrefer torefer to Temperature-Temperature- profile 1profile 2 *After reflow soldering rapid cooling should be avoided. [Temperature-profile (Surface of circuit board)]Use the conditions shown to the under figure.<1 : Lead Solder> <2 : Lead-free Solder> [ Recommended soldering pad design ]Use the following conditions shown in the figure. Handling of Silicone Resin LEDsHandling Indications During...