品牌/商标 | UTC(台湾友顺) | 型号/规格 | LS3718 |
批号 | 09 | 封装 | SOP-28 |
类型 | 其他IC |
20-BIT SERIAL TO PARALLEL
CONVERTER
DESCRIPTION
The UTC LS3718 is a 20-bit serial to parallel converter utilizing
CMOS Technology. It is incorporates control circuit, shift register,
latch and driver into a single ship. It is suitable for MCU interface.
The effective interface assignment of MPU is available as the
connection between UTC LS3718 and MPU is required only 4
lines.
The device is designed to operate up to 5MHz. When the serial
data input to the DATA terminal and the data is output from parallel
output buffer through serial in parallel out shift register and parallel
data latches.
The data can through the shift register serial output to the SO
terminal. Therefore the UTC LS3718 can cascade connection to
expand the output data number.
The hysteresis input circuit realizes wide noise margin and the
high drive-ability output buffer (25mA) can drive LED directly.
FEATURES
* 20-Bit serial in parallel out
* Cascade connection
* Operating voltage 5V±10%
* Hysteresis input 0.5V typ
* Output current 25mA
* Operating frequency 5MHz or more
品牌/商标 UTC(台湾友顺) 型号/规格 UR6225 封装 TO-92,SOT-23,25,89 批号 10 类型 稳压IC POSITIVE VOLTAGE REGULATOR DESCRIPTIONThe UTC UR6225 is a positive voltage output, three-pinregulator that provides a high current even when the input/outputvoltage differential is small. Low power consumption and highaccuracy is achieved through CMOS and laser trimmingtechnologies.The UTC UR6225 consists of a high-precision voltagereference, an error amplification circuit, and a current limited outputdriver. Transient responses to load variations have improved incomparison to the existing series. FEATURES* Maximum Output Current: 300mA(Within Max. Power Dissipation, VOUT = 5.0V)* Output Voltage Range: 1.2V ~ 6.0V in 0.1V Increments(1.2V ~ 1.9V for Custom Products)* Highly Accurate: Output Voltage ±2%(&plus...
品牌/商标 UTC(台湾友顺) 型号/规格 3563 批号 09 封装 DIP-16, SOP-8 类型 线性IC HIGH-EFFICIENCY DC/DCCONVERTERDESCRIPTIONThe UTC 3563 is a monolithic control circuitcontaining the primary functions required for DC to DCconverters and highside-sensed constant currentsource. The device consists of an internal temperaturecompensated reference, comparator, controlled dutycycle oscillator with an active current sense circuit,bootstrapped driver, and high current output switch.This device is specifically designed to construct aconstant current source for battery chargers with aminimum number of external components.Bootstrapped driver can drive the NPN output switchto saturation for higher efficiency and less heatdissipation. The UTC 3563 can deliver 1.5Acontinuous current without requiring a heat sink.FEAT...