供应德国 HBM U10 力传感器
| 价 格： | 面议 | |
| 型号/规格： | U10 | |
| 品牌/商标： | HBM |
U10M / U10S - 力传感器 - 用于动态和静态力测量
U10M - 用于静态和动态测量的 拉/压 向力传感器
- 测量体:结实,高度低: 采用多剪切力技术,对称设计
- 独立弯矩补偿:采用特殊的电子校准程序，使来自于寄生负载的串扰保持在水平，即使是双桥型号。
|
额定量程 [kN] |
英制螺纹 |
公制螺纹 |
|
1.25 kN to 25 kN |
5/8-18 UNF-3B |
M16 x 2 |
|
50 kN to 125 kN |
1 1/4-12 UNF-3B |
M33 x 2 |
|
225 kN |
1 3/4-12 UNF-3B |
- |
|
250 kN |
- |
M42 x 2 |
|
450 kN |
2 3/4-8 UNF-3B |
- |
|
500 kN |
- |
M72 x 2 |
U10 力传感器 主要用于测试台，材料测试机和生产监控。径向对称，高度低，U10 力传感器 即使在振动带宽高达 200% 情况下具有极高的强度和精度。由于具有极高的线性，即使应用于部分量程，也能够保证极高的测量精度。
采用特殊的电子校准程序，能够使来自于寄生负载的串扰保持在水平。 双桥型号主要用于航空航天测试，校准程序能够在两个测量桥都提供高精度。
TEDS, U10 力传感器的电子数据表能够使测量链配置更方便，缩短设置时间，提高测量安全性: 降低手工设定的风险。
在 U10M 和 U10S 开发过程中，采用复杂的有限元分析使其位移非常小，这对于动态测量非常重要。
U10M 力传感器f可以连接到带有公制螺纹的设备上，其具有9个额定量程，从 0... 1.25 kN, 2.5 kN, 5 kN, 12.5 kN, 25 kN, 50 kN, 125 kN, 250 kN 到 500 kN。通过采用双桥型号，调整参数以及选择连接部件, U10M 可以匹配多种测试任务。U10M 材料采用不锈钢或者铝，保护等级为 IP67.
U10S 力传感器采用英制螺纹标准，其符合 American UNF (Unified National Fine) 标准. 英制螺纹标准的 U10S 力传感器的额定量程为 1.25 kN 到 450 kN.
- 所属城市：上海 上海市
- [联系时请说明来自维库仪器仪表网]
- 联系人： 张慧
- 电话：021-51085998
- 传真：021-51069009
- 手机：13621609668
- QQ ：
供应德国 HBM DD1 - 高精度应变传感器
信息内容：专门开发的应变计的应用技术，补偿电路和选择的材料，确保该单位将有很大的精度和使用寿命长。基本的单位包括一个校准片和紧固螺钉。你可以使用的配件包的/锌和1/zv11使基本单元为钳式应变传感器。这种钳式应变传感器可以连接到圆形或扁平试样的金属或塑料制成的夹紧力测量仪对试样可以精细调整，通过安装支架。The basic unit is a displacement transducer which converts the movement of a probe tip into an electrical signal. Conversion is carried out with the aid of strain gages inside the unit, located in a full bridge circuit on the measuring probe tip.The specially developed strain gages application technology, compensation circuit and choice of materials ensure that the unit will have great accuracy and a long service life.The basic DD1 unit includes a calibration blade and fastening screw. You can use accessory kits DD1/ZA and DD 1/ZV11 to make the basic unit into a clamp-on strain transducer. This clamp-on strain transducer can be attached to round or flat specimens made of metal or plastic and the cl...
供应德国 HBM SLB700A 传感器
信息内容：The SLB700A strain transducer from HBM attaches directly to a plane surface with a friction joint and four bolts. This arrangement enables the strain of the test object to be transferred directly to the SLB700A making it ideal for installations where lack of space, or installation conditions, makes it difficult to use standard force transducers. Ideal applications for the stainless steel SLB700A include multi-stand and C-stand presses. The strain transducer is mainly intended for applications where high forces are to be measured such as roll stands and injection molding machines. Where bending effects need to be compensated, at least two SLB700A strain transducers should be mounted on opposite sides of the test piece and connected electrically in parallel. Reliable measurement results The SLB700A is designed
