HRW4-10/100A跌落式熔断器HRW4-10/200A熔断器 联系人:王总 联系电话:0577-27880112 联系手机:13362763534 一、HRW4-10/100A概述 跌落式熔断器及拉负荷跌落式熔断器是户外高压保护电器。它装置在配电变压器高压侧或配电线支干线路上、用作变压器和线路的短路、过载保护及分、合负荷电流。跌落式熔断器由绝缘支架和熔丝管二部分组成,静触头安装在绝缘支架两端,动触头安装在熔丝管两端,熔丝管由内层的消弧管和外层的酚醛纸管或环氧玻璃布管组成。拉负荷跌落式熔断器增强弹性辅助触头及灭弧罩,用以分,合负荷电流。HRW4-10/200A 跌落式熔断器在正常运行时,熔丝管借助熔丝张紧后形成闭合位置。当系统发生故障时,故障电流时熔丝迅速熔断,并形成电弧,消弧管受电弧灼热,分解出大量的气体,使馆内形成很高压力,并沿管道形成纵吹,电弧被迅速拉长而熄灭。熔丝熔断后,下部动触头失去张力二下翻,锁紧机械,释放熔丝管,熔丝管跌落,形成明显的开断位置。当需要拉负荷时,用绝缘杆拉开动触头,此时主动、静动触头仍然接触,继续用绝缘杆拉动触头,辅助触头也分离,在辅助触头之间产生电弧,电弧在灭罩狭缝中被拉长,同时灭弧罩产生气体,在电流过零时,将电弧熄灭。HRW4-10/200A 二、HRW4-10/100A用途 户外跌落式熔断器适用于35kv及以下电压频率50Hz电力系统中,作输电线路、电力变压器过载和短路保护,分合额定负荷电流只用,机械寿命≥2000次。HRW4-10/200A 三、HRW4-10/100A使用条件HRW4-10/200A 1.适用于环境温度上限40℃,下限-30℃之内。HRW4-10/200A 2.海拔不超过1000m,风速不大于35m/s 3.熔断器不适用于下述场所HRW4-10/200A 3.1有燃料或爆炸危险的场所。HRW4-10/200A 3.2有剧烈震动或冲击的场所。HRW4-10/200A 3.3有异电化学气体作用及严重空气污秽,烟雾地区。HRW4-10/200A 四、HRW4-10/100A结构简介 熔断器是由基座和消弧装置两大部分组成,灭弧管下端装有可能转动的弹簧支架,始终使熔丝处于紧张状态,以保证灭弧管在合闸位置的自锁,线路与变压器过载或短路中,熔丝熔断,熔丝迅速从灭弧管中抽出,灭弧管设计为逐级排气式解决在同一熔断器上开断大小电流的矛盾。 英文翻译: In flatly light life, if we watch a little drops of life, you will find, smiling, also is a kind of encouragement. In a game before arrival, as competitors of I is very nervous, seem to have one thousand jins weight on the shoulder, because of this race relations with my mother and I nearly a month of pay would burn, I really don't want to live up to the expectations of my mother. My mother and I together to ride the jinan is the site, in HouChang area, I very nervous, restless, and mom can't go into the HouChang area, I had to encouraging yourself, the in the mind can get a little comfort. This I play and I was very nervous, for all the judges and audience of the game, I suddenly forget the word in my mind a blank moment, a small action those lines and vividly in my mouth jumps out. It is my mother, a smile of contentment on her face appeared, it is full of her encouragement on me and hope. I immediately and confident. In this 1 minutes, 20 seconds I still nervous, 3 seconds is the brain blank, finally the 37 seconds and then let me relax, and also full of confidence. Maybe in the end of the 37 seconds I still have stress and anxiety, but I didn't find that. Mom this short smile like a persuasive, will my stress and anxiety expelled, light up my brain blank, make the memory to return to my head in. I feel my mother is a fairy, with her XianQi and divine power in the support and protect me, in the encouraged me. A smile is a kind of encouragement, it is more from relatives and friends, more is give us confidence and relax, happiness and happiness. Smile like a sweet cake, give you happiness and good; Smile like a cup of steaming hot milk tea, give you warm and escape idle; Smile like a lamp that bright light, give you comfort and light; A smile and you talking and laughing good friend, give you free and happy. I like smiling, difficult for the smile will shrink back, in fear for the smile will confidence, family for the smile will be more fusion, friends for the smile relaxed, I for the smile will work harder. Learn to smile!!!! A smile is a kind of encouragement! |
RW4-10/100A跌落式熔断器RW4-10/200A熔断器联系人:王总 联系电话:0577-27880112 联系手机:13362763534一、RW4-10/100A概述 跌落式熔断器及拉负荷跌落式熔断器是户外高压保护电器。它装置在配电变压器高压侧或配电线支干线路上、用作变压器和线路的短路、过载保护及分、合负荷电流。跌落式熔断器由绝缘支架和熔丝管二部分组成,静触头安装在绝缘支架两端,动触头安装在熔丝管两端,熔丝管由内层的消弧管和外层的酚醛纸管或环氧玻璃布管组成。拉负荷跌落式熔断器增强弹性辅助触头及灭弧罩,用以分,合负荷电流。RW4-10/200A 跌落式熔断器在正常运行时,熔丝管借助熔丝张紧后形成闭合位置。当系统发生故障时,故障电流时熔丝迅速熔断,并形成电弧,消弧管受电弧灼热,分解出大量的气体,使馆内形成很高压力,并沿管道形成纵吹,电弧被迅速拉长而熄灭。熔丝熔断后,下部动触头失去张力二下翻,锁紧机械,释放熔丝管,熔丝管跌落,形成明显的开断位置。当需要拉负荷时,用绝缘杆拉开动触头,此时主动、静动触头仍然接触,继续用绝缘杆拉动触头,辅助触头也分离,在辅助触头之间产生电弧,电弧在灭罩狭缝中被拉长,同时灭弧罩产生气体,在电流过零时,将电弧熄灭。...
HRW3-10/100A跌落式熔断器HRW3-10/200A熔断器联系人:王总 联系电话:0577-27880112 联系手机:13362763534一、HRW3-10/100A概述 跌落式熔断器及拉负荷跌落式熔断器是户外高压保护电器。它装置在配电变压器高压侧或配电线支干线路上、用作变压器和线路的短路、过载保护及分、合负荷电流。跌落式熔断器由绝缘支架和熔丝管二部分组成,静触头安装在绝缘支架两端,动触头安装在熔丝管两端,熔丝管由内层的消弧管和外层的酚醛纸管或环氧玻璃布管组成。拉负荷跌落式熔断器增强弹性辅助触头及灭弧罩,用以分,合负荷电流。 跌落式熔断器在正常运行时,熔丝管借助熔丝张紧后形成闭合位置。当系统发生故障时,故障电流时熔丝迅速熔断,并形成电弧,消弧管受电弧灼热,分解出大量的气体,使馆内形成很高压力,并沿管道形成纵吹,电弧被迅速拉长而熄灭。熔丝熔断后,下部动触头失去张力二下翻,锁紧机械,释放熔丝管,熔丝管跌落,形成明显的开断位置。当需要拉负荷时,用绝缘杆拉开动触头,此时主动、静动触头仍然接触,继续用绝缘杆拉动触头,辅助触头也分离,在辅助触头之间产生电弧,电弧在灭罩狭缝中被拉长,同时灭弧罩产生气体,在电流过零时,将电弧熄灭。二、HRW...