供应FDT压电薄膜传感器

价格：		面议
型号/规格：		FDT
品牌/商标：		MEAS

详细介绍
企业详情

产品说明：

FDT压电薄膜传感器:The “F” in FDT Series stands for ‘Flexible Leads’. These are rectangle elements ofpiezo film with silver ink screen printed electrodes. Rather than making the leadattachment near the sensor, the piezo polymer tail extends from the active sensor areaasflexcircuitmaterial with offset traces. This gives a very flat, flexible lead, with a connector at the end. The FDT elements are available in a variety of different sizes and thicknesses.Theyareavailable without a laminate (FDT), with a laminated (0.005” mylar) on one side (FLDT) or with tape release layer adhesive (FDT with adh) in the sensor area. The connector pinsontheFDTsensors can be directly soldered to a PCB with a reasonable level of care. This component cannot withstand high temperatures (> 80°C), and therefore coldering of the pins to a PCB must be done quickly. A heatsink clamped to the interface area between the film and the crimps will take the heat away from the film. Pre-tin the pins and then quickly solder them totheboard. Do not allow the soldering iron to touch the film, and do not use a dwelltimeofover5seconds on the pins. Low temperature solder can also be used.

所属品牌： MEAS
输出： 0～5V
量程： -
封装：薄膜元件
工作温度范围： 0～70℃
度：-
供电电源：无源
特点：无源，安装方便
类型：压电薄膜传感器
电气连接：电缆连接
典型应用： 传感区与引出点需要一定距离而又不便于用导线的场合
资料：http://www.sensorway.cn/sensors/119.html

北京赛斯维测控技术有限公司

公司信息未核实

所属城市：北京北京市
[联系时请说明来自维库仪器仪表网]
联系人： 江丰
电话：010-84775648
传真：010-58949029
手机：
QQ ：

公司相关产品

供应CD1050扭矩传感器

信息内容：

产品说明： CD1050系列扭矩传感器用于安装在旋转轴测量旋转扭矩。采用不锈钢材质，可以在恶劣调价下工作。该扭矩传感器采用金属应变计匹配惠斯通电桥电路，使得CD1050具有良好的温度稳定性，同时集成电路放大器可高平输出。如果标准产品不能满足您的应用或者您需要综合性的测量系统，我们的工程师团队可为您提供有力的支持。我们在为客户设计或定制特殊用途及测试环境传感器方面，有着丰富的经验。为了满足您的需求，我们还提供完整的可立即启用系统以及标准化的配套元件（传感器，电源，放大器和数字显示）等。CD1050系列扭矩传感器相关型号：CD1050 、CD1050-A1 、CD1050-A2相关阅读：>> 精量电子－美国MEAS传感器集团已收购FGP公司所属品牌： FGP输出： 2mV/V, 0.5 to 4.5Vdc, +/-5V量程： ±5～±7K (±4～±5,6K)封装：方头形机械连接工作温度范围：-20℃～80℃精确度：<±0.25% F.S.供电电源：10Vdc特点：可选放大输出类型：动态旋转扭矩电气连接：航空插头典型应用：发动机效率，过程控制设备，实验室和研究资料下载：http://www.sensorway.cn/sensors/557.html

详细内容>>

供应LDT0压电薄膜传感器

信息内容：

产品说明： LDT0压电薄膜传感器:The ‘L’ in LDT Series stands for ‘laminated’ sensor. Typically, a 0.005” (125μm) polyester layer is laminated to a 28 μm or 52μm piezo film element. When used in a ‘bending’ mode, laminated film elements develop much higher voltage output when flexed than a non-laminated DT elements series. The neutral axis is in the laminate instead of in the film so the film is strained more when flexed. The capacitance is proportional to the area and inversely proportional to the thickness of the element. Piezo film sensors LDT elements are available in a variety of lead attachment options. For significantly increased sensitivity, the LDTM-028K (M-Mass) combines an LDT0-028K form factor with the addition of a 0.72 gram round mass. The LDT1, 2 and 4 have 12” of 26 gauge twisted pair wire. The LDT0-028K and LDTM-028K with solder tabs can be soldered directly to a PCB with areasonable level of care. Piezo film cannot withstand high temperatures (>80°C)...

详细内容>>

维库仪器仪表

供应FDT压电薄膜传感器

供应CD1050扭矩传感器

供应LDT0压电薄膜传感器

相关产品