Allegro 霍尔传感器 A1212LUA
Description
The Allegro® A1210-A1214 Hall-effect latches are next
generation replacements for the popular Allegro 317x and
318x lines of latching switches. The A121x family, produced
with BiCMOS technology, consists of devices that
feature fast power-on time and low-noise operation. Device
programming is performed after packaging, to ensure
increased switchpoint accuracy by eliminating offsets that
can be induced by package stress. Unique Hall element
geometries and low-offset amplifiers help to minimize noise
and to reduce the residual offset voltage normally caused by
device overmolding, temperature excursions, and thermal
stress.
The A1210-A1214 Hall-effect latches include the following
on a single silicon chip: voltage regulator, Hall-voltage generator,
small-signal amplifier, Schmitt trigger, and NMOS
output transistor. The integrated voltage regulator permits
operation from 3.8 to 24 V. The extensive on-board protection
circuitry makes possible a ±30 V absolute maximum
voltage rating for superior protection in automotive and
industrial motor commutation applications, without adding
external components. All devices in the family are identical
except for magnetic switchpoint levels.
The small geometries of the BiCMOS process allow these
devices to be provided in ultrasmall packages. The package
styles available provide magnetically optimized solutions
for most applications. Package LH is an SOT23W, a miniature
low-profile surface-mount package, while package
UA is a three-lead ultramini SIP for through-hole mounting.
Each package is lead (Pb) free, with 100% matte tin plated
leadframes.
dzsc/18/2191/18219196.jpg
dzsc/18/2191/18219196.jpg
dzsc/18/2191/18219196.jpg
dzsc/18/2191/18219196.jpg
dzsc/18/2191/18219196.jpg
dzsc/18/2191/18219196.jpg
dzsc/18/2191/18219196.jpg
HONEYWELL 霍尔传感器 SS466A SS30AT/SS40A/ SS50AT 系列传感器是多功能双极霍尔效应传感器。这些灵敏的磁传感器提供反向极性保护并在40℃至 125℃ [-40° F 至 257° F] 的温度范围内提供稳定的输出。工作时可接受 4.5Vdc 至 24.0Vdc 的直流 (dc)供电电压。 SS30AT/SS40A/SS50AT 系列传感器是建立在霍尼韦尔通用的磁位置传感器基础上,并具有多种优势。这些传感器的设计采用了技术,为许多商用、计算机、医疗,甚至要求电机控制和转速测量的消费电子产品提供了经济可靠的解决方案。这些产品有三种封装型式,以适应各种各样的应用场合。 SS40A直插扁平引线TO-92型封装, 应用:交通运输速度和转速 (RPM)测量:转数计、计数器,马达和风扇控制,电动车辆控制,自动天窗位置。工业速度和转速 (RPM)测量:转数计、计数器,流速、流量传感,直流无刷电机的电流换相,马达和风扇控制,机器人控制霍尔传感器: 开关型:SS411A、SS413A、SS441A、SS443A、SS461A、SS466A,SS511AT、SS513AT、SS541AT、SS543AT、SS561AT、SS566AT,SS40A、SS41 开关磁阻传感器:2SS52M 模拟量:SS496B、SS495A、SS495A1、
ATS665LSGTrue Zero-Speed Hall-Effect Adaptive Gear-Tooth Sensor ICPINOUT IMAGE LINK --> Features and Benefits True zero-speed operation Switchpoints independent of air gap High vibration immunity Precise duty cycle signal over operating temperature range Large operating air gaps Defined power-on state Wide operating voltage range Digital output representing target profile Single-chip sensing IC for high reliability Small mechanical size Optimized Hall IC magnetic system 200 μs power-on time at gear speed <100 rpm AGC and reference adjust circuit Undervoltage lockout Description The ATS665 true zero-speed gear tooth sensor IC is an optimized Hall IC/rare earth pellet configuration designed to provide a user-friendly solution for digital gear tooth sensing applications. The over-molded package, holds together a samarium cobalt pellet, a pole piece and a true zero-speed Hall IC that has been optimized to the magnetic circuit. This small pa...