MXC6202G/H/M/N

Low Power, Low Profile +/- 2g Dual Axis Accelerometer with I2C Interface

Enlarge Image

» Datasheet
» Application Notes
» Evaluation Boards
» Software
» Product Selector

Sales Support

Please contact:
sales@memsic.com
or call 1-978-738-0900
Ext. 238

Features

RoHS compliant
I2C Slave, FAST (¡Ü400 KHz.) mode interface
1.8V compatible IO
Embedded Power up/down and self-test function
On-chip temperature sensor available
Eight customer defined 7-bit addresses
2.7 V to 3.6 V single supply continuous operation
Monolithic CMOS IC
Low power consumption: typically <2 mA @ 3.0 V
Resolution better than 1 milli-g
On chip mixed signal processing
>50,000 g shock survival rating
Low profile LCC package: 5mm X 5mm X 1.55mm

Application

• Information Appliances
  Cell Phones, PDA's, Computer Peripherals, Mouse, Smart Pens
  
• Consumer
  LCD Projectors, Pedometers, Blood Pressure
  Monitor, Digital Cameras
  
• Gaming
  Joystick/RF Interface/Menu Selection/Tilt Sensing
  
• GPS
  Electronic Compass Tilt Correction, Dead Reckoning Assist
  
  

General Description

The MXC6202G/H/M/N are low cost, dual axis accelerometers fabricated on a standard, submicron CMOS process. It is a complete sensing system with on-chip mixed signal processing and integrated I2C bus, allowing the device to be connected directly to a microprocessor eliminating the need for A/D converters or timing resources. The MXC6202G/H/M/N measures acceleration with a full-scale range of +/- 2 g and a sensitivity of 512counts/g (G/M) or 128counts/g (H/N) @3.0 V at 25°. It can measure both dynamic acceleration (e.g. vibration) and static acceleration (e.g. gravity). The MXC6202G/H/M/N design is based on heat convection and requires no solid proof mass.

This design eliminates the stiction problems associated with legacy technologies and provides shock survival greater than 50,000g's. Memsic's solid state design leads to significantly lower failure rates in customer applications and lower loss due to handling during manufacturing and assembly processes

The MXC6202G/H/M/N is packaged in a hermetically sealed, low profile LCC surface mount package (5 mm x 5 mm x 1.55 mm) and is available in operating temperature ranges of 0° to +70° (G/H) and-40° to +85° (M/N).

The MXC6202G/H/M/N provides two I2C digital outputs with 400 KHz, fast mode operation.
The maximum noise floor is 1 mg/allowing signals below 1 milli-g to be resolved at 1 Hz bandwidth.

深圳市广辉电子有限公司是国内实力的电子元器件代理分销商和现货库存供应商之一。 广辉电子代理经销的产品有：IC集成电路、继电器、传感器、贴片电容、贴片电阻、贴片电感、贴片磁珠、贴片二、三极管、集成电路。代理经销的品牌有: TDK、MURATA 、PANASONIC、TAIYO、NICHICON、NEC、YAGEO、WALSIN、RALEC、AVX、KEMET、SPRAGUE、PARTSNIC、Intel、Motorola、Sharp、Sony、Samsung、 Sanyo、 Siemens、Maxim、Harris、Hyundai、National、Fairchild、Philips、Toshiba、Catalyst、 Winbond. 我司供应贴片与插件钽质电容，贴片电容；同时在偏冷门、军工、停产、紧缺料、断档、急料类电子元器件也具备相当优势！除有大量现货库存外，我们还与国内外数千家OEM、EMS厂家及现货商联网，可将库存直接呈现在您的眼前！从定单到交货，最快可在48 小时内将急需的货物送到您的手中，从而可以使您早日将产品推出市场，抢占先机！！ 本公司一惯坚持：“品质、价格合理、交货快捷、服务至上”的发展理念，始终将“诚信、认真、执着、乐观”的精神作为企业发展的宗旨，通过强大的市场服务网络体系向客户提供规范化、化、多元化、全方位的优质服务。真诚欢迎海内外客户前来洽谈合作，共谋发展和建立长期的合作关系！同时也希望能与电子界的同行进行广泛的交流合作，共同为业界的繁荣发展作出应有的贡献！