供应锂电池充电保护IC-PT6105
| 价 格： | 面议 | |
| 型号/规格： | PT6105 | |
| 品牌/商标： | 上海华润矽威 |
GENERAL DESCRIPTION
The PT6105 is a highly integrated, digitally programmable, charging/discharging management IC for 3 to 7 serially connected Li-Ion or LiFePO4, batteries used in portable electrical tools or other multi-cell battery powered systems. It contains a multi-channel 10-bit ADC digitizing battery voltages, environment temperature, and battery discharge current. The converted data is transferred to MCU via I2C interface and is used for battery balancing and safety protections against battery over-voltage, under-voltage, discharging over current, and over temperature. The integrated battery balance circuitry could deliver a programmable shunt current as high as 200mA without the need of external transistors. The PT6105 buffers both DC and PWM (Pulse Width Modulation) MOSFET control signals generated from MCU to drive an electrical motor. Key parameters in the PT6105 are programmable by a microprocessor through an I2C interfacing port, which features customers to achieve flexible and optimal multi-cell Li-ion/LiFePO4 battery charging/discharging progress control and safety protection. The package is QFN-24.
FEATURES
Charging Control
3~7 Li-ion or LiFePO4 battery cells system
Cell balancing with programmable shunt currents up to 200mA
Accurately sensing battery cell voltages and temperature through a 10-bit ADC.
MCU controlled protection cutoff voltages.
Discharging
Programmable discharge over-current or short-circuit protection thresholds
MCU controlled battery under-voltage protection thresholds
10~15V PWM or DC MOSFET gate driving voltages
200mA maximum MOSFET gate driving current
Load protection to prevent discharging on short-circuit or light load between two
terminals connected to the motor
MCU Interfacing
A 10-bit ADC samples up to 7 individual cell voltages, environmental temperature, and discharge current.
ADC sampling time <20ms through all channels
ADC fail bit indicates overflow
100 kHz I2C communication port
2 seconds watchdog function for MUC.
5~3.2V supply voltage to MCU
Other Protections
6V under voltage lockout voltage (UVLO)
Protected from <1.0ms negation glitch toward ground generated from battery pack
Internal over temperature shutdown (TSD)
- 所属城市：广东 深圳
- [联系时请说明来自维库仪器仪表网]
- 联系人： 郑先生
- 电话：0755-82570180
- 传真：0755-82570180
- 手机：18948314942
- QQ ：
供应具有热调节功能独立的锂离子电池充电器--PT6102
信息内容：PT6102 是一款高度集成的单节锂离子电池充电器，较少的外部元件数目使得它非常适合于便携式应用。内部集成功率管，不需要外部检测电阻和防倒灌二极管。充电电流通过外部电阻进行设置，充电结束电压固定在4.2V。热反馈可以自动调节充电电流，可以在大功率或高环境温度下对芯片加以保护PT6102 分三个阶段对电流进行充电：当电池电压低于2.9V 时是涓流充电，当电池电压大于2.9V 时是恒流充电，并且涓流充电电流是恒流充电电流的1/10,当电池电压到4.2V 时进行恒压充电，在恒压充电过程中，充电电流逐渐减少，当减少到恒流充电电流的1/10 时，结束充电过程。特点 可以用 USB 端口直接对单节电池进行充电. 充电电流可以到 800mA 不需要外部功率管，检测电阻和防倒灌二极管 涓流、恒流、恒压三阶段，并有热调节功能，可以在无过热的情况下化充电电流 精度达±1%的4.2V 充电电压 SOT23-5 和ESOP8 封装应用 蜂窝电话 蓝牙应用 数码相机 PDA、MP3、MP4 播放器
供应PT4105是一款大功率LED驱动器IC
信息内容：型号:PT4105 主要参数: 工作方式:PWM; 输入电压:2.5-18/V; 输出电压:18V; 开关管:内置; 工作频率:500KHZ; 效 率:85% 封 装:SOP-8. 应用:LED照明,MR16射灯、1W/3W 等各种照明灯饰. 专门针对大功率LED照明驱动应用的固定频率电压模式降压集成电路,输入电压可达18V, 内置功率MOS管,输出电流可达1A,可在很宽的输入电压范围内驱动单颗1W(电流350mA) 或3W(电流700mA)LED,或者各种大功率LED串/并联组合. PT4105内部采用PWM控制,反馈电 压仅为200mV,具有很高的转换效率,内含欠压锁定、过热保护、限流保护等功能,应用设计 方便,外围电路简单,是多节电池供电手电筒、汽车辅助照明、家庭装饰照明、矿灯等应用的 理想选择.PT4105采用SOIC8封装. 用PT4105实现的单颗1W大功率LED驱动方案,有效工作电压范围为2.5~18V,当输入电压为5~12V时, 其转换效率在90%以上,当输入电压为12~18V时,其转换效率可在85%以上.用PT4105实现的单颗 3W大功率LED驱动方案,有效工作电压范围为6~18V,其转换效率可在85%以上.
