供应8电口宽温工业以太网交换机（管理型）

价格：

1.00

详细介绍
企业详情

品牌:美国Transition 传输速率:10Mbps/100Mbps 型号:SISTM1010-180-LRT 设备类型:工业交换机传输模式:全/半双工自适应端口数:8口以下

ii) Extended Operating Temperature: (-40°C to +75°C)
1) SISTM1010-180-LRT	(8) 10/100BASE-TX (RJ-45) [100 m/328 ft.]

dzsc/17/9240/17924038.jpg

Ports 7 and 8 can be connected in a Redundant Ring topology with recovery time of < 300ms, offering increased uptime and increased reliability for your most critical communication needs.While Fiber is shown in the application, the redundant ring can be UTP as well.

Eliminate EMI and RFI issues or overcome distance limitations with copper based cabling by using the Industrial Switch to convert your copper based equipment over to fiber optics. The switch can connect to either 10Base-T or 100Base-TX ports and can provide redundant 100Base-FX fiber optic connections for links up to 20 km.

AutoCross™
Automatically detects and configures the twisted pair port on the converter to the correct MDI or MDI-X configuration.
IEEE 802.1p, 4-level priority queing
IGMP Snooping V1 with Query mode
Auto-Negotiation (802.3u)
Allows devices to perform automatic configuration to achieve the best possible mode of operation over a link.
IEEE 802.1Q VLAN capability
Port Trunking/Mirroring
Redundant Ring Switching Technology (recovery time <300ms)
SNMP trap and SMTP email trap support
SNTP Clock Synchronization
Bandwidth Allocation
Ingress Packet Filtering
DHCP Client Support
Spanning Tree/Rapid Spanning Tree
TFTP Firmware Update
Dual Homing Application Support
Auto-Sensing Redundant DC Power Inputs
Dry Contact Relays
System Configuration Restore/Backup
Standard (0°C to 60°C) or extended (-40°C to 75°C) operating temperature
Barrel connecter interface cable included for connecting external AC/DC power supply

Standards	IEEE Std. 802.3™, 802.1p™,802.1Q™, 802.3u™, 802.1d™, 802.1w™, 802.3x™
Fiber Optic Connector Specs
Status LEDs	PWR (Power):ON = power connected R.M.:ON = Device is the Master in the redundant ring network PWR 1 (Power):ON = primary power connected PWR 2 (Power):ON = backup power connected Fault:ON = Fault on port link or loss of PWR 1 or PWR 2 LNK/ACT (Fiber):ON = Link on fiber 100Mb/s; Flashing = data transmitting FDX/COL (Fiber):ON = Full duplex link on fiber; Flashing = collisions occuring
Data Transfer Rate	10BASE-T:14,880 pps 100BASE-TX:148,800 pps
MAC Addresses	2K
Max Packet Size	1536 bytes
Data Memory Buffer	1Mb
Backplane	2.0 Gbps
SNMP MIB	RFC 1213 MIBII, RFC 1493 Bridge MIB,RMON RFC 1757, RFC 2674 VLAN MIB, RFC 1643 Ethernet like MIB, RFC 1215 Trap MIB
Dimensions	Width: 2.1" [54 mm] Depth: 4.1" [105 mm] Height: 5.3" [135 mm]
Ingress Protection	IP 31
Input Power	12 to 48 VDC, 0.2A, redundant inputs with reverse polarity protection; Additional barrel connector cable
Power Consumption	-180 Models:4.6 watts -162 Models:6.0 watts
Environment	0 to +60°C Std. operating temp. -40 to +75°C Ext. operating temp. -40 to +85°C storage temp. 5 – 95% humidity non-condensing 0 – 10,000 feet altitude
Shipping Weight	2 lbs. [0.90 kg]
Safety Compliance	UL 60950; cUL60950
EMI Compliance	CISPR22/EN55022; EN60950 Class A; FCC Class A; CE Mark; EN61000-4-2; EN61000-4-3; EN61000-4-4; EN61000-4-5; EN61000-4-6
Environmental Compliance	IEC60068-2-32 (Free fall) IEC60068-2-27 (Shock) IEC60068-2-6 (Vibration)
Warranty	Lifetime

上海坤兰电气工程有限公司

公司信息未核实

所属城市：上海上海市
[联系时请说明来自维库仪器仪表网]
联系人： 杨继周
电话：21-31265256
传真：21-31265256
手机：
QQ ：

公司相关产品

供应6电2光宽温工业以太网交换机（管理型）

信息内容：

品牌:美国Transition 传输速率:10Mbps/100Mbps 型号:SISTM1013-162-LRT 设备类型:工业交换机传输模式:全/半双工自适应端口数:8口以下ii) Extended Operating Temperature: (-40°C to +75°C)1) SISTM1013-162-LRT(6) 10/100BASE-TX (RJ-45) [100 m/328 ft.](2) 100BASE-FX 1300nm multimode (SC) [2 km/1.2 miles]Applicationsdzsc/17/9240/17924039.jpgPorts 7 and 8 can be connected in a Redundant Ring topology with recovery time of < 300ms, offering increased uptime and increased reliability for your most critical communication needs.While Fiber is shown in the application, the redundant ring can be UTP as well.Eliminate EMI and RFI issues or overcome distance limitations with copper based cabling by using the Industrial Switch to convert your copper based equipment over to fiber optics. The switch can connect to either 10Base-T or 100Base-TX ports and can provide redundant 100Base-FX fiber optic connections for links up to 20 km.FeaturesAutoCross™Automatically detects and configures the t...

详细内容>>

维库仪器仪表

供应8电口宽温工业以太网交换机（管理型）

供应6电2光宽温工业以太网交换机（管理型）

相关产品