电池组Pack information
描述Description Rechargeable Lithium Ion Battery Pack
电芯组合Cell configuration 1P-1S
型号名称Model name 523450AL
标称电压Normal Voltage 3.7V
标称容量Normal Capacity 1000mAh
内阻Internal Resistance <
尺寸 Size 53.5*34.2*5.4±
输出方式 Output style 出线长
1. 性能Specifications
3-1. 电性能Electrical specifications
(1) 电压Voltage 标称Normal 3.7V
(2) 容量Capacity 标称Normal 1000mAh (标准充放电by standard charge and discharge)
(3) 充电Charge 电压Voltage 4.2+/- 0.05V
电流Current 100mA (
200mA (
方式Method CC/CV (恒流/恒压)
结束Finish < 20mA
(4) 放电Discharge 电流Current 1000mA (持续Continuous)
200mA (标准Standard)
终止Empty 3.0V
3-2. 外观Physical specifications
尺寸Size 请参考附图 Refer attached drawing
LxWxH 53.5*34.2*5.4±
3-3 使用环境Using conditions
(1) 温度Temperature 充电Charge 0 ~
放电Discharge -10 ~
贮存Storage -20 ~
-20 ~
-20 ~
(2) 湿度Humidity 工作 Operation 20 ~ 85%RH (not condensed)
贮存Storage 40 ~ 85%RH (not condensed)
NO. Items Specifications 1 Charge voltage 充电电压 4.2V 2 Nominal voltage 标称电压 3.7V 3 Nominal capacity 标称容量 250 mAh @ 0.2C Discharge(放电) 4 Charge current 充电电流 Standard Charging::0.5C 标准充电: 0.5C Rapid charge: 1.0C 快速充电: 1.0C 5 Standard Charging method 标准充电方法 0.5C CC(constant current)charge to 4.2V,then CV(constant voltage 4.2V)charge till charge current decline to ≤0.05C 0.5C CC(恒流)充电至4.2V,再CV(恒压4.2V)充电直至充电电流≤0.05C 6 Charging time 充电时间 Standard Charging:3.0hours(Ref.) 标准充电: 3.0小时(参考值) Rapid charge: 2hours(Ref.) 快速充电: 2小时(参考值) 7 Max.charge current 充电电流 1.0 C 8 Max.discharge current 放电电流 3.0 C 9 Discharge cut-off voltage 放电截止电压 2.8V 10 Operating temperature 工作温度 Charging: 0℃~45℃ 充电: 0℃~45℃ Discharging:0℃...
NO. 项目 特性 2. 1 电池型号 PL062044P 2. 2 外壳材质 铝塑包装膜 2. 3 额定电压 3.7 V 2. 4 典型容量 480mAh 2. 5 最小容量 480mAh 2. 6 内阻 ≤280mΩ 2. 7 放电截止电压 3.0V 2. 8 充电电流 1.0CmA 2.9 放电电流 1.0CmA 2.10 充电电压 4.2V 2.11 充电方法 恒流恒压(CC/CV) 2.12 保 护 板 参 数 过充保护:4.25-4.35V IC:DW01+ 过放保护:2.30-3.0V MOS:8205 自流保护:1.2-6.0A 自耗电流:≤6.0μA 2.13 尺寸 厚度 6.0+0.2 –0.3mm 宽度 200.5 –0.5mm 高度 44+0.5 –0.5mm 2.14 工作温度 充电温度 0~45℃ 放电温度 -20~60℃ 2.15 存贮温度 -20~45℃ 2.16 相对湿度 65±20%RH 2.17 外观要求 产品外观干净无缺陷,如明显划痕、裂缝、漏液或变形