Description
The YH13s omnipolar Hall effect sensor IC is fabricated from mixed signal
CMOS technology. It incorporates advanced chopper-stabilization techniques to
provide accurate and stable magnetic switch points.
The circuit design provides an internally controlled clocking mechanism to
cycle power to the Hall element and analog signal processing circuits. This serves
to place the high current-consuming portions of the circuit into a Sleep” mode.
Periodically the device is Awakened” by this internal logic and the magnetic flux
from the Hall element is evaluated against the predefined thresholds. If the
flux density is above or below the Bop/Brp thresholds then the output transistor is
driven to change states accordingly. While in the Sleep” cycle the output transistor
is latched in its previous state. The design has been optimized for service in
applications requiring extended operating lifetime in battery powered systems.
The output transistor of the YH13s will be latched on in the presence of a
sufficiently strong South or North magnetic field facing the marked side of the
package. The output will be latched off in the absence of a magnetic field.
Features
2.2 V to 6.0 V battery operation
High sensitivity and high stability of the magnetic switching points
High resistance to mechanical stress
Digital output signal
Switching for both poles of a magnet (omnipolar)
Description The YH13s omnipolar Hall effect sensor IC is fabricated from mixed signal CMOS technology. It incorporates advanced chopper-stabilization techniques to provide accurate and stable magnetic switch points. The circuit design provides an internally controlled clocking mechanism to cycle power to the Hall element and analog signal processing circuits. This serves to place the high current-consuming portions of the circuit into a Sleep” mode. Periodically the device is Awakened” by this internal logic and the magnetic flux from the Hall element is evaluated against the predefined thresholds. If the flux density is above or below the Bop/Brp thresholds then the output transistor is driven to change states accordingly. While in the Sleep” cycle the output transistor is latched in its previous state. The design has been optimized for service in applications requiring extended operating lifetime in battery powered systems. The output tra...
YHM148 Hall Switch Features and Benefits CMOS Hall IC Technology Solid-State Reliability Micropower consumption for battery-powered applications Omnipolar, output switches with absolute value of North or South pole from magnet Operation down to 2.5V High Sensitivity for direct reed switch replacement applications Small Size Custom sensitivity selection is available. Applications Solid state switch Handheld Wireless Handset Awake Switch ( Flip Cell/PHS Phone/Note Book/Flip Video Set) Lid close sensor for battery powered devices Magnet proximity sensor for reed switch replacement in low duty cycle applications Ordering Information Part No. Temperature Suffix Package Code YHM148 E (-40 )