品牌:TI 型号:MAX3221CDBR 批号:08+ 封装:SSOP 营销方式:现货 产品性质:热销 处理信号:模拟信号 制作工艺:半导体集成 导电类型:双极型 集成程度:小规模 规格尺寸:2（mm） 工作温度:-40~125（℃） 静态功耗:2（mW）

长期供应各国集成IC\二三极: MAX3221CDBR

特性

• RS-232 Bus-Pin ESD Protection Exceeds ±15 kV Using Human-Body Model (HBM)
• Meets or Exceeds the Requirements of TIA/EIA-232-F and ITU v.28 Standards
• Operates With 3-V to 5.5-V V_CCSupply
• Operates up to 250 kbit/s
• One Driver and One Receiver
• Low Standby Current ...1 µA Typical
• External Capacitors ...4 × 0.1 µF
• Accepts 5-V Logic Input With 3.3-V Supply
• Designed to Be Interchangeable With Maxim MAX3221
• Alternative High-Speed Pin-Compatible Device (1 Mbit/s)
  • SNx5C3221
• Auto-Powerdown Feature Automatically Disables Drivers for Power Savings
• Applications
  • Battery-Powered, Hand-Held, and Portable Equipment
  • PDAs and Palmtop PCs
  • Notebooks, Subnotebooks, and Laptops
  • Digital Cameras
  • Mobile Phones and Wireless Devices

说明

The MAX3221 consists of one line driver, one line receiver, and a dual charge-pump circuit with ±15-kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. These devices operate at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate.

Flexible control options for power management are available when the serial port is inactive. The auto-powerdown feature functions when FORCEON is low and FORCEOFF\ is high. During this mode of operation, if the device does not sense a valid RS-232 signal on the receiver input, the driver output is disabled. If FORCEOFF\ is set low and EN\ is high, both the driver and receiver are shut off, and the supply current is reduced to 1 µA. Disconnecting the serial port or turning off the peripheral drivers causes the auto-powerdown condition to occur. Auto-powerdown can be disabled when FORCEON and FORCEOFF\ are high. With auto-powerdown enabled, the device is activated automatically when a valid signal is applied to the receiver input. The INVALID\ output notifies the user if an RS-232 signal is present at the receiver input. INVALID\ is high (valid data) if the receiver input voltage is greater than 2.7 V or less than –2.7 V, or has been between –0.3 V and 0.3 V for less than 30 µs. INVALID\ is low (invalid data) if the receiver input voltage is between –0.3 V and 0.3 V for more than 30 µs. Refer to Figure 5 for receiver input levels.

深圳市五洋电子成立于2004年，是一家的集成电路供应商，公司自成立至今一直致力于民用级、工业级、**级、冷门集成电路等提供全方位的服务，代理和分销LT、TI/BB、ST、NXP、IR、MAX、AD、SANYO等各国的集成电路。和海外各大厂家有多年合件关系，公司常备有大量原装库存，以保证所供给货品为正规渠道，符合原厂全新原包标准，争取到最有利的货期，为您生产的产品品质打下坚实的基础，解决您的后顾之忧。为国内外电子厂家、商家提供手货源和全面配套服务。 欢迎新老客户查询洽谈主营:集成IC、二三极管、电源模块、高频管、继电器等电子元器。※全部自家库存※为大小工厂配单※支 持 中 小 贸 易 商 发 展 ※为 客 户 备 货，自 备 大 量 现 货 ※销 售 专 家，一 切 为 了 您 的 需 求 而 变 ※选 择 专 业、值 得 信 赖，因 为 专 业、所 以 优 秀