供应VTI红外甲烷传感器模块2015S-4
| 价 格： | 1.00 |
品牌:VTI 型号:2015S-4 种类:气敏 材料:金属 材料物理性质:半导体 材料晶体结构:单晶 制作工艺:集成 输出信号:模拟型 防护等级:1 线性度:1（%F.S.） 迟滞:1（%F.S.） 重复性:1（%F.S.） 灵敏度:1 漂移:1 分辨率:1
红外CH4检测模块
红外CH4测量模块（泵吸采样式）
测量0-100%VOL（4-100%可选择）
供电电压+12VDC（8-16VDC），电流250MA，平均125MA
精度：如果标定5%的甲烷，应使用5±0.1%的甲烷气体，精度在0-5%是的为±0.25%,在5-100%为读数的5%
输出：SPI数字信号和0-1VDC线性电压
尺寸：4.9*2.9*3.25(英寸)
dzsc/17/2730/17273034.jpg
dzsc/17/2730/17273034.jpg
TheVALTRONICS Model 2015SPI-4 is an OEM NDIR CH4 sensor with digital signal processing and
temperature compensation. The SPI (Serial Peripheral Interface) see Application Notes A59 & A64.
Each serial numbered sensor is individually gas calibrated and temperature compensated at the
factory. Single Point field calibration is supported. On board & remote switches for calibration .
TheVALTRONICS Model 2015SPI-4 is an OEM NDIR CH4 sensor with digital signal processing and
temperature compensation. The SPI (Serial Peripheral Interface) see Application Notes A59 & A64.
Each serial numbered sensor is individually gas calibrated and temperature compensated at the
factory. Single Point field calibration is supported. On board & remote switches for calibration .
TheVALTRONICS Model 2015SPI-4 is an OEM NDIR CH4 sensor with digital signal processing and
temperature compensation. The SPI (Serial Peripheral Interface) see Application Notes A59 & A64.
Each serial numbered sensor is individually gas calibrated and temperature compensated at the
factory. Single Point field calibration is supported. On board & remote switches for calibration .
TheVALTRONICS Model 2015SPI-4 is an OEM NDIR CH4 sensor with digital signal processing and
temperature compensation. The SPI (Serial Peripheral Interface) see Application Notes A59 & A64.
Each serial numbered sensor is individually gas calibrated and temperature compensated at the
factory. Single Point field calibration is supported. On board & remote switches for calibration .
TheVALTRONICS Model 2015SPI-4 is an OEM NDIR CH4 sensor with digital signal processing and
temperature compensation. The SPI (Serial Peripheral Interface) see Application Notes A59 & A64.
Each serial numbered sensor is individually gas calibrated and temperature compensated at the
factory. Single Point field calibration is supported. On board & remote switches for calibration .
- 所属城市：江苏 南京
- [联系时请说明来自维库仪器仪表网]
- 联系人： 张德权
- 电话：025-52981820
- 传真：025-52981820
- 手机：
- QQ ：
供应RAE电化学氢气传感器4H2-1000
信息内容：品牌:RAE 型号:4H2-1000 种类:气体 材料:混合物 材料物理性质:绝缘体 材料晶体结构:单晶 制作工艺:集成 输出信号:模拟型 防护等级:1 线性度:1（%F.S.） 迟滞:1（%F.S.） 重复性:1（%F.S.） 灵敏度:1 漂移:1 分辨率:10ppmRAE电化学传感器4H2-100 测量范围 0-1000ppm,分辨率10ppm
美国DCS公司红外二氧化碳传感器模块M300
信息内容：品牌:DCS 型号:M300 种类:气敏 材料:金属 材料物理性质:导体 材料晶体结构:非晶 制作工艺:红外 输出信号:模拟型 防护等级:1 线性度:1（%F.S.） 迟滞:1（%F.S.） 重复性:1（%F.S.） 灵敏度:1 漂移:1 分辨率:1美国DCS公司生产高浓度CO2检测模块dzsc/17/2769/17276965.jpg详细说明测量范围0-100%,精度0.1%,寿命10年以上,可根据需要调节量程.产品参数产品选型MODEL300和MODEL304产品选型.主要用于测量CO2浓度超过5%以上的应用.MODEL 30□-□-□□□-□□□-□□-□□-□□-□无壳体0有壳替4 扩散式D采样式S如果是个非标准的CO2浓度值,请输入浓度,并向厂家询问可行性和价格.0 – 10%0100 – 20%0200 – 100%100 传感器集成在电路板上AXX传感器单元分离式,标准连接电缆长度09’’C0912’’C1218’’C1824’’C2436’’C36 无继电器R0有继电器(工厂默认全量程的1/2处)R1 无LED显示L04位LED显示L1 不带变压器,绝大多数应用T0带变压器,北美配置,110V 50/60HzT1带变压器,欧洲配置,220V 50/60HzT2 不防水的红外探测头(使用于干燥环境)N防水的红外探测头W
