M211 Solid State Relay PDF下载 ■DESCRIPTION The M211 is a bi-directional, single-pole, single-throw, normally open multipurpose solid-state relay in a miniature 4-pin small outline package. It is designed to replace electromechanical relays in general purpose switching applications. The relay consists of an integrated circuit that drives two rugged source-to-source enhancement type DMOS transistors - optically coupled to a light emitting diode. The output MOS transistors are protected with free-wheeling diodes that can handle up to 1.5A of inrush current, making the relay ideal for switching lamps and highly inductive loads. ■FEATURES ·High input-to-output isolation·Low input control power consumption·100mA maximum continuous load current·35 ohms maximum on-resistance·Long life/high reliability·Ultra miniature 4-pin small outline package■Application ·Telecom switching·Tip/Ring control·PCMCIA mo...
特点 矮小细长的空间节省型产品 该卡式继电器是高度12.3mm×宽度5mm×长度21mm的细长型产品。特别是在高度方面和本公司以往产品相比减少了5.7mm,即使是在插入插座后也比以往的单个产品高度低1mm,为设备的小型化做出了贡献。 触头额定电流小型化且实现了5A 卡式继电器RB10 □的额定通电电流小型化且实现了5A。可以对应高负载开关操作。 采用双触头 在触头部分采用的是接触立刻开性良好的双触头结构,因此可以对应更高可靠性控制需求。 产品阵容中还包括高灵敏度型120mW 产品 在200mW产品的基础上进一步增加了高灵敏度的120mW产品。 采用了可自动的清洗的塑料密封结构 通过SIL型端子排列可以更方便的进行印刷电路板设计 备有专用插座TP04 UL・CSA・认证产品 取得了加强绝缘IEC1131-2)认证