供应 A3212EEHLT-T 传感器
| 价 格： | 面议 | |
| 型号/规格： | A3212EEHLT-T | |
| 品牌/商标： | ALLEGRO |
FEATURES
■ Micropower Operation
■ Operation with North or South Pole
■ 2.5 V to 3.5 V Battery Operation
■ Chopper Stabilized
Superior Temperature Stability
Extremely Low Switch-Point Drift
Insensitive to Physical Stress
■ ESD Protected to 5 kV
■ Sol id-State Reliability
■ Small Size
■ Easily Manufacturable with Magnet Pole Independence
dzsc/13/4515/13451507.jpg
ABSOLUTE MAXIMUM RATINGS
Supply Voltage, VDD .............................. 5 V
Magnetic Flux Density, B .......... Unlimited
Output Off Voltage, VOUT ...................... 5 V
Output Current, IOUT ........................... 1 mA
Junction Temperature, TJ ................ +170°C
Operating Temperature, TA
Range 'E-' .................... -40°C to +85°C
Range 'L-' .................. -40°C to +150°C
Storage Temperature Range,
TS .............................. -65°C to +170°C
Caution: These CMOS devices have input
static protection (Class 3) but are still susceptible
to damage if exposed to extremely
high static electrical charges.
dzsc/13/4515/13451507.jpg
Features
- Micropower Operation
- Operate with North or South Pole
- 2.5 V to 3.5 V Battery Operation
- Chopper Stabilized
Superior Temperature Stability
Extremely Low Switch-Point Drift
Insensitive to Physical Stress - Solid-State Reliability
- Small Size
- Easily Manufacturable with Magnet Pole Independence
dzsc/13/4515/13451507.jpg
Description
The A3211 and A3212 integrated circuits are ultra-sensitive, pole independent Hall-effect switches with latched digital output. These sensors are especially suited for operation in battery-operated, hand-held equipment such as cellular and cordless telephones, pagers, and palmtop computers. A 2.5 volt to 3.5 volt operation and a unique clocking scheme reduce the average operating power requirements to less than 15 µW with a 2.75 volt supply.
Unlike other Hall-effect switches, either a north or south pole of sufficient strength will turn the output on in the A3212, and in the absence of a magnetic field, the output is off. The A3211 provides an inverted output. The polarity independence and minimal power requirements allow these devices to easily replace reed switches for superior reliability and ease of manufacturing, while eliminating the requirement for signal conditioning.
Improved stability is made possible through chopper stabilization (dynamic offset cancellation), which reduces the residual offset voltage normally caused by device overmolding, temperature dependencies, and thermal stress.
This device includes on a single silicon chip a Hall-voltage generator, small-signal amplifier, chopper stabilization, a latch, and a MOSFET output. Advanced BiCMOS processing is used to take advantage of low-voltage and low-power requirements, component matching, very low input-offset errors, and small component geometries.
Four package styles provide magnetically optimized solutions for most applications. Miniature low-profile surface-mount package types EH and EL (0.75 and 0.50 mm nominal height) are leadless, LH is a leaded low-profile SMD, and UA is a three-lead SIP for through-hole mounting. Packages are available in lead (Pb) free versions (suffix, –T) with 100% matte tin plated leadframe. EL package for limited release, engineering samples available.
Functional Block Diagram
dzsc/13/4515/13451507.jpg
- 所属城市：广东 深圳
- [联系时请说明来自维库仪器仪表网]
- 联系人： 林先生/李小姐
- 电话：0755-33062282/33062283
- 传真：0755-33062281
- 手机：13728992566
- QQ ：
供应热卖SS441A传感器
信息内容：特点： ● 3.8-30VDC供电 ●数字电流沉输出 ● 3针一列 PCB引脚 ●方块霍尔设计消除了机械压力效应 ●磁特性温度补偿 ●可定制特殊的动作 /释放点 ●双极，单极，锁存型 ●很高的输出电流能力——电流 50mA ●动点 /释放点对称于零点高斯（双极锁存） ●工作温度范围 -40～150℃ ●封装材料：Plaskon 3300H ●表面封装型号：SS400-S（切短或整形的引脚） SS400内含整个温度范围的热平衡集成电路，负的温度补偿特性能与低成本磁钢负温度系数为匹配带宽间隙调整提供了 SS400 在 3.8～30VDC电源电压范围内特别稳定的工作特性。 SS400能连续输出20mA电流，电流为 50mA. 注：当锁存型突然掉电后，其输出在上电后可能改变状态，在足够强的磁场中，传感器的输出由所在磁场决定。锁存型突然掉电后，其输出在上电后可能改变状态，在足够强的磁场中，传感器的输出由所在磁场决定。dzsc/13/4515/13451508.jpgdzsc/13/4515/13451508.jpg
供应HAL815UT-K可编程线性霍尔传感器
信息内容：HAL815UT-K 原装现货供应 主要特点： * 比例电压输出和内置DSP的高精度线性霍尔效应传感器 * 多个可编程磁特性存储在具有冗余和锁定功能的非易失性存储器(EEPROM) * 开路(地和电源线突变检测)、过压和欠压检测 * 可逐个编程或通过选择拉低输出脚来编几个并联在相同供电电压上的传感器 * 温度特性可编程可匹配所有常见的磁性材料 * 可编程的钳位功能 * 通过调制供电电压来编程 * 工作环境温度-40 °C up to 150 °C * 工作电压4.5 V up to 5.5 V * 工作磁场范围:静态磁场和动态磁场2 kHz * 所有管脚具有过压和反向电压保护 * 在机械应力下磁特性表现超强鲁棒特性 * 具有短路保护的推挽输出 * EMC和ESD化设计 详情请访问:www.10086ic.com
