住友光纤熔接机81C
TE-81C 纤芯直视型光纤熔接机
住友光纤熔接机81C
小型、轻量、
重量2.1公斤(带电池)
电池可持续熔接加热230次
熔接时间6秒，加热补强时间14秒(Quick模式下)住友光纤熔接机81C
触摸屏控制住友光纤熔接机81C
全导航触摸屏界面，使操作更简单更便捷
4.1英寸彩色LCD显示
更完善的耐环境特性
IPx2 水性
IP5x 尘性
50°C温度下可熔接作业
海拔6000m高度可工作
76cm高度坠落（5面）冲击
住友光纤熔接机81C带灵活夹具的双联加热器
快速
可编程序
用户可选择夹具操作
住友光纤熔接机81C帮助视频
熔接机内置了帮助视频，用户能够便利地确认熔接操作顺序。
规格参数
TE-81C (住友光纤熔接机81C们)| Applicable optical fiber | Material | Silica Gl |
|---|---|---|
| Profile te | Single Mode Fiber (F)/ITU-T G652 Multi Mode Fiber (MMF)/ITU-T G651 Dispersion Shifted Fiber (DSF)/ITU-T G653 Non-Zero Dispersion Shifted Fiber (NZ-DSF)/ITU-T G655, G656 Bend Insensitive Fiber (BIF)/ITU-T G657 Erbium Doped Fiber (EDF) | |
| Number of fiber | Single | |
| Cladding diameter | φ80 to φ150 μm *1 | |
| Coating diameter | φ100 to φ1,000 μm | |
| Cleave length | 5 to 16 mm (with coating clamp) 10mm (Drop cable / Indoor cable with fiber holder) | |
| Applicable Cable*2*3 | 0.25 mm primary coated 1-fiber drop cable | 3.1mm or 2.6mm×2.0mm (excluding messenger steel wire) |
| 0.25 mm primary coated 1-fiber indoor cable | 2.0mm×1.6mm | |
| Splice Performance | Splice loss (tical)*4 | F : 0.01 dB MMF: 0.01 dB DSF : 0.03 dB NZDSF : 0.03 dB |
| Return loss (tical) | 60dB or greater | |
| Screening load (tical) | 1.96N - 2.09N (at stage) | |
| Splice time (tical) | Approx. 6 seconds ( G652 Quick Mode) Approx. 7 seconds ( G652 Std. Mode) Approx. 8 seconds (Auto Mode) | |
| Automatic fiber identification | F / MMF / DSF / NZDSF / BIF / Other | |
| Splice & Heat cycles*5 | Approx. 230 cycles | |
| Fiber view & magnification | 2 CMOS cameras observation, 320X (zoom : 700X) for X or Y single axis view, 88X for X & Y dual axis view | |
| Splice program | Maximum 300 splice programs can be seleed and customized. | |
| Splice data storage | 10,000 splices | |
| Splice image capture | 200 splices | |
| Fiber Alignment method | Core | Aligns the left and right fibers by the center of their cores. |
| Adaptive | The alignment method mainly for BIF. It is used in splicing optical fiber with complicated core profiles. | |
| Diameter | Aligns the left and right fibers by their outer diameter. | |
| AIAS | The axis is moved beforehand. AIAS is effeive to splicing of fiber with high eccentricity. | |
| ATTN | “Attenuation”. Fibers are spliced by shifting the centers of the left and right fiber cores to achieve intentional high splice losses. | |
| Heater Performance | The number of heaters | 2 built-in heaters are available |
| Sleeve length | Up to 60mm | |
| Proteion sleeve *6 | The proteion sleeve for single fiber, up to 60mm length, up to φ5mm diameter. e.g. FPS-1 (single, 60mm, Cleave length 5-16mm) FPS-61-2.6 (thin, single, 60mm, Cleave length 5-16mm) FPS-40 (single, 40mm, Cleave length 5-10mm) FPS-40-2.6 (thin, single, 40mm, Cleave length 5-10mm) | |
| Heating time(tical) *7 | Approx. 14 seconds (Slim 60mm 0.25 Quick Mode) Approx. 18 seconds (Slim 60mm 0.25 Std. Mode) | |
| Program | Max. 100 settings | |
| Physical Charaeristics | Size (Main body) *8 | 120W×154D×130H(mm) |
| Weight | Approx. 2.1 kg (With Battery pack BU-11) | |
| Display size | 4.1" touch screen color LCD display | |
| V-groove illumination | White LED | |
| Power Conditions | Power consumption | Max. 110W |
| AC operation | With AC adapter ADC-1430S Input: AC 100-240V 50/60Hz 1.1A | |
| DC operation | Input: DC 10-15V, 7.5A | |
| Battery operation | (With BU-11) 11.1V (4600mAh) | |
| DC output | 12V For Sumitomo’s hot jacket remover | |
| In - Out Terminal | Serial port | U 2.0 mini-B te |
| Storage media | SD / SDHC memory card | |
| Environmental Conditions | Operating temperature | -10 to +50°C |
| Storage temperature | -40 to +80°C | |
| Humidity | 0 to 95%RH with no dew present | |
| Altitude | Up to 6,000 m | |
| Environmental Durability*9 | Shock resistance | Drop from 76cm on 5 faces (Excluding face) |
| Water resistance | Equivalent to IPx2 (Operates normally after being exposed to water ping at 3mm/min. for at least 2.5 min on each of 4 surfaces tilted at 15 degree.) | |
| Dust resistance | Equivalent to IPx5 (Operates normally after 8 hours in a dust chamber containing dust of particle size 75 um or below) |
*2 各种光纤夹具适用不同涂覆层和芯数的光纤。
*3 光纤夹具不能用于松套管光缆。住友光纤熔接机81C*4 在室温条件下，用住友同种光纤以ITU-T和IEC标准的切断法测得。
*5 熔接加热的操作次数很上受电池状态和作业环境影响。
*6 长度为40mm的保护套管只能用于切断长小于10mm的光纤。并且40mm的保护套管不能用于过涂覆层光纤直径φ250μm的光纤。
*7 涂覆层直径φ250μm的光纤在室温下并且使用AC电源供电不使用DC电源的情况下，可使用住友FPS-61-2.6保护套管。
*8 不包含有突起的部分。
*9 住友对电池性能进行了试验和确认，但不本产品受损情况下的状态。住友光纤熔接机81C
住友光纤熔接机81C,600C，81M12全系列住友产品供应
