询价
NACHI遥控溢流阀型号说明,不二越遥控溢流阀价格
C pressure control valve and remote control valve piping,
the piping volume will produce vibration,
It is recommended to use a thick-walled steel pipe with an inner diameter of 4 mm or less and a length of m.
V When the pressure regulator needs to adjust the bolt, add "K" to the model.
压力调节时，扭松锁紧螺母，将手
柄向右转动，压力上升，向左转动压力下降。
The relief valve belongs to the balance piston type, its coat
There is a wet solenoid valve, which constitutes the hydraulic
Unloading circuit of the device.
W This type is built to prevent vibration when unloading
part. At the same time, in the vacuum circuit can also be made
Use, the maximum value of its adjustment time is 3 seconds left
right. (Please refer to the use of decompression circuit example)
通过连接溢流阀，减压阀等平衡活
塞型压力控制阀的遥控口，可以容易地进行遥控。
w RCD型也可以作为直动型溢流阀使用。
By connecting the relief valve, pressure relief valve and other balance live
Plug-type pressure control valve remote control port, you can easily remote control.
W RCD type can also be used as a direct acting relief valve.
x 泄油口背压请设定0 . 2 M P a{2kgf/cm2}以下。
c 压力控制阀和遥控阀配管时，由于配管容积会产生震动，
建议使用内径为4mm以下厚壁钢管、长度为m以内。
v 压力调节部需要调整螺栓时，在型号规定处增加“K”字母。
NACHI遥控溢流阀型号说明,不二越遥控溢流阀价格
