honeywell温控器DC1020CL-101000-E四川代理商
联系人:魏工
产品资料:
4. This parameter is t applicable if Proportional Band 1 is set to 0 or if Output 2 (COOL) is
t fitted.
5. The Message Display will show Diff 1 for ON/OFF control on Output 1 only, Diff 2 for
ON/OFF control on Output 2 only and Diff for ON/OFF control on both Output 1 and Output
2.
6. Internal software prevents (a) the Setpoint High Limit being given a value less than any
setpoint value contained in the currently-resident programs, and (b) the Setpoint Low Limit
being given a value greater than any setpoint value contained in the currently-resident
programs.
7. These parameters are t applicable if the Recorder Output Option is t fitted.
8. Output 1 Cycle Time is t applicable if Proportional Band 1 is set to 0 or if Output 1 is a
DC Linear output. Output 2 Cycle Time is t applicable if Proportional Band 1 is set to 0, if
Proportional Band 2 is set to 0, If Output 2 is t fitted or if Output 2 is a DC Linear output.
9. These parameters are applicable only if a linear input is fitted
10. Applicable only if the RS485 Serial Communications Option is fitted.
11. Applicable to TPSC control only.
12. If the instrument is configured to have one lock code only (Message Display will show
Lock), this value is used to enter Program Define Mode and Controller Define Mode. If two
lock codes are to be used (Message Display will show Lock C), this value applies to
Controller Define Mode only.
Alarm
Op era tion
Process
Alarm Value
Hysteresis Band
Alarm Inactive Alarm Active
Alarm Inactive
Process
Variable
Process
Alarm Value
Hysteresis Band
Process
Alarm Inactive Alarm Active
Alarm Inactive
Hysteresis Band
Hysteresis Band
Process
Alarm Value
Alarm
Alarm Setpoint
Inactive
Alarm Active Alarm Inactive
Alarm Active