耐电痕化指数测定仪
触摸屏-耐电痕化指数测定仪-自动型
Touch screen - resistant tester - automatic tracking index
（NLD-BI型）
(te NLD-BI)
（0-600V）
(0-600V)
耐电痕化指数测定仪满足标准：
Meet the standard:
IEC60112 、IEC60335、 IEC884-1、GB2099.1、UL 746A 、GB/T4207、GB4706.1 AS 3638-92等标准
IEC60112, IEC60335, IEC884-1, GB2099.1, UL 746A, GB/T4207, GB4706.1 AS 3638-92 standard
耐电痕化指数测定仪产品概述：
Produ overview:
漏电起痕试验（电痕化指数试验）是在固体缘材料表面上，在规定尺寸 ( 2mm × 5mm ) 的铂电之间，施加某一电压并定时 (30s) 定高度 ( 35mm ) 滴下规定液滴体积的导电液体 (0.1%NH 4 CL) ，用以评价固体缘材料表面在电场和潮湿或污染介质联合作用下的耐漏电性能，测定其相比电痕化指数 (I) 和耐电痕化指数 (PTI) 。
Tracking test (tracking index test) is in the solid insulating materials on the surface, within the specified size (2mm * 5mm) between the platinum elerode, applying a voltage and timing (30s) constant height (35mm) regulations conduive liquid droplet volume drop (0.1%NH 4 CL), is used to evaluate the solid surface of insulating material in eleric and wet or combined pollution of medium leakage resistance performance, measuring the comparative tracking index (I) and proof tracking index (PTI).
漏电起痕试验仪（电痕化指数试验仪）仪适用于照明设备、低压电器、家用电器、机床电器、电机、电动工具、电子仪器、电工仪表、信息技术设备的研究、生产和质检部门，也适用于缘材料、工程塑料、电气连接件、辅件行业。
Tracking test apparatus (tracking index tester) instrument suitable for lighting equipment, low-voltage elerical appliances, household elerical appliances, elerical tools, eleric motor, eleric tools, eleronic instruments, elerical instruments, information technology equipment research, produion and quality inspeion departments, is also applicable to insulation materials, engineering plastics, elerical conneors, auxiliary industry.
产品特点：
Produ features:
耐电痕化指数测定仪主控制电路系统由西门子PLC控制
The main control circuit system controlled by Siemens PLC
参数设置及操作显示部分由7寸触摸屏完成
Parameter setting and display part is composed of 7 Inch Touch Screen
通过触摸屏设定参数后，自动升压到设定的电压值，并自动校准电流到1000MA
After the parameters set by the touch screen, automatic boost to a set voltage value, and automatic calibration of current to 1000MA
滴液大小、滴液时间间隔和滴液时间可以通过触摸屏进行操作和设定
The drop size, drop the time interval and the dropping time can touch screen operation and setting
开始实验后，能够实时采集泄露电流，并能够动态显示泄露电流曲线，同时滴液次数通过软件动态同步显示，操作简单、直观、使用方便。
Start after the experiment, can colle real-time leakage current, and can display the dynamic leakage current curve, at the same time drops by the number of dynamic simulation software synchronous display, operation is simple, intuitive, easy to use.
耐电痕化指数测定仪本仪器带有排风和照明
This instrument with ventilation and lighting
本仪器使用操作方便，实验过程直观显示，技术，性能卓越
This instrument is convenient operation, visual experimental process display, leading technology, excellent performance
技术参数：
Technical parameters:
1、 试验电压：0-600V AC
1, the test voltage: 0-600V AC
2、 电材料：电头 — 铂金属（白金）
2, the elerode material: the elerode head - platinum (Platinum)
3、 电压力：1.0±0.05N
3, the elerode pressure: 1 ± 0.05N
4、 电距离：4.0mm ± 0.01mm ，夹角 60°±5
4, elerode distance: 4.0mm ± 0.01mm, an included angle of 60 ° ± 5
5、 电电压：100-600V（48~60HZ）可调，短路电流在1.0±0.1A时电压下降小于10%
5, the elerode voltage: 100-600V (48~60HZ) adjustable voltage, short circuit current at 1 ± 0.1A decreased less than 10%
6、 滴液高度：为30~40mm 可调
6, the drop height: 30~40mm adjustable
7、 滴液大小：44-55滴/1cm3 可调
7, the droplet size: 44-55 drops of /1cm3 adjustable
8、 滴液时间：30s±5s，
8, dropping time: 30s ± 5s,
9、 滴液次数：可自由设定
9, the droplet number: can be set freely
10、 漏电判断：回路电流大于0.5A并维持2秒钟则继电器动作切断电流，指示样品不合格
10, the leakage judgment: the loop current is greater than 0.5A and maintained for 2 seconds then relay aion to cut off the current, indicating sample unqualified
11、试验过程：试验程序自动控制，抽风
11, test: test program automatic control, independent exhaust
12、工作室体积：0.75m3（可根据不同标准定做0.5 m3 或 0.75m3 ）
12, the studio volume: 0.75m3 (can be customized according to different standards of 0.5 m3 or 0.75m3)
13、设备外尺寸：630mm宽×500mm深×1300mm高
13, equipment size: 630mm x 500mm x 1300mm wide deep high
耐电痕化指数测定仪设备配置：
Device configuration:
主机一台
Host a
铂金电一对
A pair of platinum elerode
9寸触摸屏一个
A 9 Inch Touch Screen
电源线一根
A power line
距离规一个
A distance
控制系统一套
A set of control system
照明灯一个
A lighting lamp
排风扇一个
Fan a
滴液装置一套
Dropping device of a set
耐电痕化指数测定仪，欢迎咨询！
