TP9-A便携式防爆本质安全石油测量温度计
TP9-A石油温度计的设计和测试符合国际本质安全防爆标准，适用于易燃易爆场合0区。
TP9-A采用耐用的不锈钢和塑料部件，符合人体工学设计。表面和不粘电缆易于清洁，使TP9-A非常适合沥青等重质液体产品。与以前的型号一样，TP9-A采用耐用的薄膜RTD传感器，可提供可靠的温度测量，适用于低光照条件的自动背光，以及更高精度的新主板。现在有一个更大的显示屏，带有1/2英寸（13毫米）的字母数字字符和凸起按钮，易于操作。中间按钮是简单的开/关操作。直观的菜单提供用户记录读数，选择摄氏度或华氏度单位，显示分辨率和校准温度。显示屏上的图标有助于用户查看温度稳定性，电池状况和执行辅助功能。易于更换的AA电池可提供长达200小时的机器运行。
TP9-A具有多种探头配置，允许的电缆长度可达165英尺（50米），是许多储罐计量应用的理想选择。
提供一年保修，NIST可追溯的4点校准报告和操作手册，提供终身服务。
温度：
分辨率：0.01度
温度范围：-40°F至400°F（-40°C至204°C）
注意：标准校准不提供全范围精度
校准精度：
32到200°F时±0.2°F（0到100°C为±0.1°C）
200至400°F时±0.5°F（100至200°C为±0.3°C）
可定制校准点和范围。
4点NIST可追溯测试报告
长期漂移不超过0.05％/年
符合API要求
特点：
? 1/2英寸（13毫米）LCD显示屏
? 可切换单位°C或°F
? 分辨率0.1或0.01
? 低电量和故障指示
? 通过面板按钮进行校准调整。
? 20分钟后自动关闭。
? 存储和显示10个记录读数，平均，低和高读数。
? 指示温度升高/降低的箭头。
? 推荐的环境温度范围：32°F至112°F（0°C至44°C）
构造：
? 探针：304不锈钢，密封胶，同轴电缆，芳纶纤维和PFA电缆护套
? 外壳：不锈钢坚固的面板安装按钮静电耗散塑料手柄
? 主体尺寸：10“L x 4.5”H x 6“W（24.5 x 12 x 14cm）
? 重量：3.1磅（1.4千克） - 带75'标准重量的探头组件
电池：
2节AA碱性; 电池寿命约为200小时
电池工作温度范围为-4到130°F（-20到54°C）
注意：如果环境温度极低或过高，电池可能无法提供足够的电量。
典型应用：
管输，危险场所，本质安全，库存盘点，过程检测，储罐，管道，驳船，船舶，铁路槽车，油罐车
材料：汽油，柴油，沥青，液体硫磺，石化产品，粘稠，腐蚀性，酸，化学，碱，糖蜜，糖浆，蒸馏酒，航空燃料
推荐操作：
API 7.2，油轮和码头国际安全指南，API 4和其他认可的程序和标准。
TP9-A
Zone 0 Intrinsically Safe Portable Petroleum Gauging Thermometer re-designed to the latest standards for use in Hazardous Locations
Description
The TP9-A is a Zone 0 intrinsically safe digital gauging thermometer re-designed to the latest standards for use in hazardous locations. With over 30 years experience manufacturing digital thermometers, ThermoProbe has designed the TP9-A with reliable, high accuracy RTD sensors based on our previous industry-standard thermometers such as the TP7-C and TP9.
The latest TP9-A electronics are more accurate than previous models based on our laboratory thermometer technology. The convenient user interface provides a large 1/2” alpha numeric character display and buttons that can be easily used with gloves. An automatic backlight feature is included to help reading the display in low light conditions. An intuitive menu allows the user to easily select Celsius or Fahrenheit units, display resolution, and access calibration. Icons on the display help the user identify temperature stability, battery condition and menu items. The TP9-A comes equipped with easily replaceable AA batteries, providing up to 200 hours of operation.
The TP9-A rugged instrument body is constructed from stainless steel and static-dissipative plastic components. The TP9-A ergonomic probe storage and stainless construction is well suited for gauging heavy products that are hard to clean such as asphalt. With multiple probe configurations and allowable lengths up to 50 meters (165 ft), the TP9 is well suited to many tank gauging applications. The probe assembly is constructed of easy to clean materials such as non-stick cable and stainless steel.
Certifications
The TP9-A is recognized with international (IECEx), European (ATEX), and EurAsian (TR TS) safety certificates.
Applications
Recommended Operation per API 7.2, International Safety Guide for Oil Tankers and Terminals, API 4 and other recommended procedures and standards.
Custody Transfers, Hazardous Location, Intrinsically safe, Inventory, PET, Tank, Pipeline, Barge, Ship, Railcar, Tank Truck, Viscosity, Petroleum, Portable, Digital, Thermometer, Inspector, NIST, Certified, Ex, ATEX, IECEx, EAC, TIIS, GOST, TR TS
Gasoline, Diesel, Asphalt, Molten Sulphur, Petrochemical, Viscous, Caustic, Acid, Chemical, Alkali, Molasses, Syrup, Distilled spirits, Aviation fuel
Maximum Dimensions：10”L x 4.25”H x 6.4” W
Weight：3.1 lb (1.4 kg) – with 75' standard weight probe assembly
Probe：Stainless Steel, Sealant, Aramid Fiber Reinforced, FEP or PFA Cable Jacket, Coaxial Construction
Enclosure Material：Stainless Steel Static-dissipative Plastic Probe Holder
Batteries：2 AA Alkaline; Battery Life of approximately 200 hours Battery manufacturer’s battery operating temperature range -4 to 130°F, -20 to 54°C Note: Battery may not provide adequate power if ambient temperature is extremely low or high.
Temperature：Resolution 0.01 Range: -40 to 400°F -40 to 204°C Calibrated Accuracy: ±0.2°F from 32 to 200°F ±0.5°F from 200 to 400°F ±0.1°C from 0 to 100°C ±0.3°C from 100 to 200°C 4 Point NIST Traceable Report of Test Long-term drift not to exceed 0.05%/year Meets API requirements
Certification：ATEX & IECEx (Ex ia IIB T4 Ga)
Maximum Dimensions | 10”L x 4.25”H x 6.4” W |
Weight | 3.1 lb (1.4 kg) – with 75' standard weight probe assembly |
Probe | Stainless Steel, Sealant, Aramid Fiber Reinforced, FEP or PFA Cable Jacket, Coaxial Construction |
Enclosure Material | Stainless Steel Static-dissipative Plastic Probe Holder |
Batteries | 2 AA Alkaline; Battery Life of approximately 200 hours Battery manufacturer’s battery operating temperature range -4 to 130°F, -20 to 54°C Note: Battery may not provide adequate power if ambient temperature is extremely low or high. |
Temperature | Resolution 0.01 Range: -40 to 400°F -40 to 204°C Calibrated Accuracy: ±0.2°F from 32 to 200°F ±0.5°F from 200 to 400°F ±0.1°C from 0 to 100°C ±0.3°C from 100 to 200°C 4 Point NIST Traceable Report of Test Long-term drift not to exceed 0.05%/year Meets API requirements |
Certification | ATEX & IECEx (Ex ia IIB T4 Ga) |
Probe Assemblies
Thermoprobe gauging thermometers come equipped with probe assemblies consisting of a length of non-stick 2-wire cable and a stainless steel weighted RTD temperature sensor. Indelible brass markings are applied to the cable to aid in tank depth determination. The Probe Assembly part numbers are specified as follows:
Example: Our most standard PG-075-SW-SM probe assembly is 75 feet long (075) with a Standard Weight (SW) and brass markings every 5 feet (SM). Various configurations are available.
Standard Weight
0.25 lb (0.11 Kg)
This reliable design is our most popular probe.
Extra Weight
0.50 lb (0.23 Kg)
This design has the same diameter as the Standard Weight but is slightly longer and heavier.
Railcar Weight / No Weight
The Railcar probe is produced as a specialty probe for the railcar industry specifically for small diameter gauging tubes fitted in many tanker cars.
Asphalt Weight
0.75 lb (0.34 Kg)
The probe of choice when working with liquid asphalt, molten sulfur, molasses, or similar high-viscosity petrochemicals.
