厂家：美国泰克
16通道，可作示波器，可作逻辑分析仪
可外接VGA显示器，MS DOS格式兼容软驱
基本参数
- 2.5 pF, 1 megaohm Podlet Style FET Probes
- 显示模式：模拟、时序图和总线模式
- <&plun;100 ps 时间分辨率
- 16 Input Channels
- 通道 2 GS/s 同步采样
- 500 MHz 实时带宽
- Logic Family Presets for TTL, ECL and CMOS
- Sophisticated Time Qualified Triggering with Four Word Recognizers
优势特点
- Facilitates Hands-free Connection to T Devices
- Low-capacitance Probe for Nonintrusive Probing
- 强大的触发功能大大缩短故障定位的时间
- 混合模式显示更易于发现时序故障
- 通道取样易于分析复杂综合的交互系统
应用
- 硬件性能测试
- 多通道数据采集
- 复合信号分析
- A/D 和 D/A 分析
- 硬件时序分析
TLS216 Logic Scope
The TLS216 Logic Scope is a new cl of instrument designed to simplify the task of debugging dial hardware. The Logic Scope seamlessly combines in a single instrument the og acquisition system of a high-speed dial storage oscilloscope (DSO) with the triggering and display systems of a logic yzer. The 500 MHz bandwidth Logic Scope samples all channels simultaneously at 2 GS/s and has sophisticated time-qualified triggering, a high resolution color display and an integrated MS DOS compatible 3.5 inch floppy disk drive.
Sophisticated Triggering to Identify Complex Dial Problems
In addition to edge trigger, most dial signals can be easily captured using pulse, glitch and pattern triggers. The Logic Scope provides two new trigger resources that allow the instrument to directly trigger on common dial circuit behavior. The industry's first time-interval or sequence trigger te monitors the time between two events, allowing the instrument to easily trigger on setup time violations, hold-time violations or unexpected propagation delay. The powerful "Time-out" trigger te can be used to capture incomplete handshake sequences or to trigger the instrument when the DUT "hangs".
All of these trigger tes let developers identify channel-to-channel relationships, including 16-Bit patterns and time-related/time-qualified system faults. The Logic Scope's external trigger-input can be used as a "Trigger Arm" to enhance cross-triggering between two instruments, simplifying the task of using a Logic Scope with other test equipment.
2.5 pF, Low-m FET Probes Ensure Nonintrusive Connection
The Logic Scope includes a set of 16 specially designed probes that have extremely low probe-tip m (1.5 grams) and input capacitance (2.5 pF). The P6240 low probe-tip m ensures that connections made to surface mount and fine pitch ICs will be reliable. The low input capacitance, combined with the 1 megaohm input resistance, decreases the effect of the probe on the DUT's operation, allowing very accurate measurements to be made with confidence.
These characteristics are made possible by using a "podlet-style" probe-tip design instead of the "pencil-style" design of traditional oscilloscope probes. Employing the de facto industry standard of 0.1 inch spacing between the signal and ground inputs, each 0.1 inch thick podlet can directly attach to the hundreds of readily available IC adapters and clips.
