LED隔离球泡电源

描述（DCRIPTION）

本电源将是AC85V ~AC265V 交流输入电压转换成直流电压24V DC，恒定输出电流350mA(具体要求更改)。将用于Part20(7W) LED进行供电。This is a seri of general purpose AC/DC adapters which convert 85Vac
~265Vac to a DC voltage of 224V. with rated output current of 350mA.Would
afford Part20(7W) LED.

电气规格（ELERICAL SPECIFICATION）

2.1输入（INPUT）

2.2输出(OUPUT)

2.2.1额定输出 (Rated output )

t : Ripple Voltage is measured with
oscilloscope with bandwidth 20MHz . A

47uF E-cap and 0.1uF ceramic-cap shall be
conneed to the onneor in parallel.

3.保护功能(PROTEION)

3.1短路保护(Short Circuit Proteion)

Shorting of output will t cause power
supply to damage, or any safety hazard. The power supply shall rume rmal
operation after the short is removed.

3.2输入保护Input Proteion

The
power supply has a 1A Fuse
to prote itself. And it’s t rume rmal operation after the malfunion
was removed.

4.性（RELIABILITY）

4.1 MTBF

The MTBF of the charger shall be 50000
hours minimum while operated at 25^°C
ambient, 100/240Vac input line voltage and maximum output current and voltage .

4.2开关 ON/OFF

The LED power
shouldwithstand
at least 3000 switch ON/OFF at worst case environmental parameter and full
load.

5.环境特性（ENVIRONMENTAL）

5.1气候条件规格（CLIMATIC SPECIFICATIONS）

Operating
temperature : -10℃~ 50℃

Operating
humidity : 0% ~98% (n-condensing)

Operation Altitude
: to 10,000ft.

Storage
Temperature : -30℃~80℃

Storage Humidity
: 0% ~98% (n-condensing)

Storage Altitude
: to 20,000ft.

Cooling Method
:Conveion or Forced air

6.标准

6.1缘阻

Input
To Output输入/输出     
DC500V 50MΩmin (at room temperature)

6.2标准（SAFETY STANDARD）

与客户灯具一起过安规。（具体待定）

7电磁兼容性（EMC-SPECIFICATION）

7.1电磁干扰（EMI）

The power supply
shall compliance with the following Criterion:

1)传导干扰度（Conduion Emission）:

*EN55015, CLASS B

2)辐射干扰度（Radiated Emission ）:

*EN55015, CLASS B

8.机械规格（MECHANICAL SPECIFICATIONS）

8.1物理尺寸（Dimension）

* 29&tim;26&tim;17mm(L* W * H ).

8.2线材（WIRE）

8.2.1输入AC线和输出线

采用电子线材