热释电激光能量传感器 – 0.2µJ 到 10J
Ophir热释电激光能量传感器采用的技术，能在范围广泛的条件下得到和可重复的测量，包括到 5ms 的长脉冲和 25KHz 的重复频率。
量热释电传感器 – 50µJ 到 40J，孔径 95mm
与上面的热释电传感器类似，但配备有散射片，因此能测量量和平均功率。
| Sensor | Features | Aperture | Spectral Range | Power Range | Max. Frequency | P/N |
|---|---|---|---|---|---|---|
 PE9 |
Pyroelectric for very low energies | Ø8mm | 0.15-12µm | 0.2µJ-1mJ | 4,000Hz | 7Z02877 |
PE9-F |
As above to 25KHz | Ø8mm | 0.15-12µm | 0.3µJ-1mJ | 25,000Hz | 7Z02882 |
 PE10-C |
Pyroelectric for low energies | Ø12mm | 0.15-12µm | 1µJ-10mJ | 25,000Hz | 7Z02932 |
PE10BB |
As above broadband absorber | Ø12mm | 0.15-12µm | 10µJ-10mJ | 150Hz | 7Z02871 |
| PE25-C |
Medium aperture pyroelectric | Ø24.mm | 0.15-3µm | 8µJ-10J | 10,000Hz | 7Z02937 |
PE25BF-C |
As above high damage threshold | Ø24.5mm | 0.15-3, 10.6µm | 60µJ-10J | 250Hz | 7Z02935 |
| PE50-C |
Large aperture pyroelectric | Ø46mm | 0.15-3µm | 10µJ-10J | 10,000Hz | 7Z02936 |
| PE50BF-C |
As above high damage threshold | Ø46mm | 0.15-3, 10.6µm | 120µJ-10J | 250Hz | 7Z02934 |
| PE50HD |
High damage threshold for 193nm radiation | Ø46mm | 193nm | 0.5mJ-10J | 100Hz | 7Z02863 |
High energy pyroelectric sensors - 50µJ - 40J
| Sensor | Features | Aperture | Spectral Range | Power Range | Max. Frequency | P/N |
|---|---|---|---|---|---|---|
PE50-DIF-C |
Pyroelectric with diffuser, high repetition rate. Complete calibration curve | Ø35mm | 0.19-3µm | 20µJ-10J | 10,000Hz | 7Z02939 |
| PE25BF-DIF-C |
Pyroelectric with diffuser for high damage threshold. Complete calibration curve. | Ø20mm | 0.19-2.2µm | 100µJ-10J | 250Hz | 7Z02941 |
| PE50BF-DIF-C |
Pyroelectric with diffuser for highest damage threshold. Complete calibration curve. | Ø35mm | 0.19-2.2µm, 2.94µm | 200µJ-10J | 250Hz | 7Z02940 |
PE50-DIF-ER |
Pyroelectric with removable diffuser for high damage threshold | Ø46mm Ø33mm with diffuser | 0.19-3µm 0.4-3 with diffuser |
60µJ-30J | 400Hz | 7Z02867 |
PE100BF-DIF |
Largest aperture pyroelectric with removable diffuser | Ø96mm Ø85mm with diffuser | 0.15-3µm, 0.4-2.5µm with diffuser |
2mJ-40J | 35Hz | 7Z02890 |
Available legacy pyroelectric energy sensors
| Sensor | Features | Aperture | Spectral Range | Power Range | Max. Frequency | P/N |
|---|---|---|---|---|---|---|
PE50-DIF |
Pyroelectric with diffuser, high repetition rate. Complete calibration curve | Ø35mm |
0.19-3µm |
50µJ - 10J | 3,000Hz | 7Z02885 |
| PE50BB-DIF |
Pyroelectric with removable diffuser | Ø46mm Ø33mm with diffuser |
0.19-20µm 0.4-2.5µm with diffuser |
100µJ -4, 0J | 40Hz | 7Z02866 |
