询价
- 企业类型：贸易商
- 新旧程度：全新
- 原产地：日本
基本型SMC无杆气缸工作原理
产品描述：
无杆气缸如果操作所在的动能超过允许值时，这可能会损坏 内部零件及导致产品故障。
请特别注意动能 各级设计和操作过程中避免超出允许的极。
注2）以上的值表示转动开始和所造成的减速度之间的时间 减震器。
虽然通过旋转台所需要的时间，以达到后的转动端 减速的不同而不同的操作条件
（负荷，旋转的惯性力矩 速度和操作压力），约0.2?2秒是必需的。的范围 角度减震器工作在其中是旋转端与值之间 如下所示。
无杆气缸英文资料：
3. When rotation of the rotary table with internal shock absorber
is set at a value smaller than the table below, the piston stroke
becomes smaller than the shock absorber's effective stroke
and energy absorption capacity decreases.
1. When operating at high speed with a large load
weight, a large amount of energy is applied to the
actuator and can cause damage.
Refer to the model selection on page 20 to find the proper
2. Do not machine the fixed orifice of the port to
enlarge its size. If the fixed orifice size is enlarged,
As a standard feature, the rotary table is equipped with a
rotation adjustment screw (adjustment bolt or shock absorber)
that can be used to adjust the rotation. The table below shows
the rotation adjustment per single rotation of the rotation
5. Shock absorbers are consumable parts. When a decrease in
energy absorption capacity is noticed, it must be replaced.
4. Products with shock absorber are not designed to smooth stop
but to absorb the kinetic energy of the load. If the load has to
be stopped smoothly, a shock absorber of the optimum size
meeting the operating conditions must be installed external to
基本型SMC无杆气缸工作原理
