54100A系列网络分析仪可提供设备特性。设备包括：放大器、天线、适配器、RF电桥、电缆、波相传输线、接收器、衰减器、VCO、开关、耦合器、过滤器等。的软硬件特性可加速生产力和准确性。结合自动波段搜索功能加快调节速度。低源同步和高指向性SWR自动测试仪准确。
★快速准确的测量传输、返回损耗及性返回损耗、SWR、群延迟、功率和距离误差。
★晶体源稳定和准确。
★内置自动化特征包括距离误差
★内置磁盘驱动
★结实的机箱
★传输收益（损耗），群延迟和功率测量
★传输及返回损耗（或SWR）
★适配器、衰减器、终端、耦合器及RF电桥
★54107A 纯量测试系统（0.001-1.5GHz）
特点
54100A系列网络分析仪可提供设备特性。设备包括：放大器、天线、适配器、RF电桥、电缆、波相传输线、接收器、衰减器、VCO、开关、耦合器、过滤器等。的软硬件特性可加速生产力和准确性。结合自动波段搜索功能加快调节速度。低源同步和高指向性SWR自动测试仪准确。
★快速准确的测量传输、返回损耗及性返回损耗、SWR、群延迟、功率和距离误差。
★晶体源稳定和准确。
★内置自动化特征包括距离误差
★内置磁盘驱动
★结实的机箱
★传输收益（损耗），群延迟和功率测量
★传输及返回损耗（或SWR）
★适配器、衰减器、终端、耦合器及RF电桥
★54107A 纯量测试系统（0.001-1.5GHz）
技术指标
yzer Measurement mod Tranission(dB),return loss(dB),SWR(linearSWR),optiona group delay(ns),power(dBm)precision return loss(dB) and optionaldistance-to-fault
Dynamic range -55 to +16dBm,autozeroing with DC detection
Inputs Three,two standard inputs,A and B,with optionathird reference channel,R(Option 5)
Display channels Two channels are used to select and simultaneouslydisplay any two inputs fromA,B,or R.The inputs can also be displayed asratios A/R or B/R.
Scale rolution 0.1 to 10dB(m) per division in 0.1dB steps
Cursor functions Search for trace maximum,minimum,dB level,dBbandwidth,next marker and active marker
Averaging 2,4,8,16,32,64,128,or 256
Limit lin Two limit in,either single value or multilevel segmented,for each trace.Segmented lin may be made from up to 10individually editable segments.
Auto-zero Performs an AC modulation cycle and lowlevel calibration during sweeper ratrace
Save/Recall Thirteen sets of front panel set-ups andthirteen sets of trace memory can be stored in non-volatile instrument memory.
Trace mask A swept frequency measurement can be storedto a graticule trace mask for visual comparison to later measurements.
Disk drive Built-in 3.5 inch,1.44 floppy disk drive
Autosave Automatically increments the trace datafile name and reference nuer during succsive data storage operationsto the DOS disk
Source Frequency range 1Mhz to 110GHz,model dependent
Alternate sweep Sweep alternately between frequenc yrangset differently for channel 1 and channel 2
CW Provid single frequency output(both channelsturned off)
Frequency rolution Rf Model(54107A,54109A,54111A):10kHz,Microwavemodels:100khz
Output power Maximum guaranteed levelled output poweris model dependent.
Reverse power protection UP to 5 Watts.Limited to 1 Watt with attenuatoroption
Appli-
cation function Min/Max hold Save the minimum and maximum valu of succsivweeps or the coination of the two
Cursor functions Automatic cursor seach updat the bandwidth,minimum,ormaximum levels of the displayed trace.
Comprsion tt automation Determin the gain comprsion point overthe operating freqeuncy range of an ampliffier by succsively incrementingthe source power and measuring the amount of comprsion until a pret"X"dBlimit is exceeded.
Self tt Performs a self tt every time power isapplied or when SELF TT pushbutton is prsed.If an error is detected,adiagnostic code appears,identifying the cause and location of the error.
General Operating temperature 0°to 50℃
Power 48 to 400Hz,300VA
M 18kg(39lb.)
Printer Parallel printer interface is compatiblewith the Canon BJ30,Bj200e,and most Epson FX-compatible printers.
Transit case Hard shell case with custom foam inserts,PN:760-183
EMC Meets European community requirements forCE marking
订货信息 Model/Order No. Name
Option 1 Options
Rack mounting with slid
Option 2 70dB RF step attenuator
Option 2A 70dB,20Ghz MW step attenuator
Option 2B 70dB,26.5GHz MW step attenuator
Option 2C 70dB,40GHz MW step attenuator
Option 2D 70dB,50GHz MW step attenuator
Option 4 75Ω source output(available to 3.0GHz)
Option 5 Add reference channel
Option 6 Add external levelling
Option 7 Internal distance-to-fault software
Option 8 Internal relative group delay software
Option 12 Add front panel cover
Option 13 Add front mounted handl
Option 16 +15V DC supply for millimeter wave source modul(availablewith<20GHz models only)
Option 25 Maintenance manual
Option 26 Extra operation and GPIB programming manual
Option 33 Canon printer
★快速准确的测量传输、返回损耗及性返回损耗、SWR、群延迟、功率和距离误差。
★晶体源稳定和准确。
★内置自动化特征包括距离误差
★内置磁盘驱动
★结实的机箱
★传输收益（损耗），群延迟和功率测量
★传输及返回损耗（或SWR）
★适配器、衰减器、终端、耦合器及RF电桥
★54107A 纯量测试系统（0.001-1.5GHz）
特点
54100A系列网络分析仪可提供设备特性。设备包括：放大器、天线、适配器、RF电桥、电缆、波相传输线、接收器、衰减器、VCO、开关、耦合器、过滤器等。的软硬件特性可加速生产力和准确性。结合自动波段搜索功能加快调节速度。低源同步和高指向性SWR自动测试仪准确。
★快速准确的测量传输、返回损耗及性返回损耗、SWR、群延迟、功率和距离误差。
★晶体源稳定和准确。
★内置自动化特征包括距离误差
★内置磁盘驱动
★结实的机箱
★传输收益（损耗），群延迟和功率测量
★传输及返回损耗（或SWR）
★适配器、衰减器、终端、耦合器及RF电桥
★54107A 纯量测试系统（0.001-1.5GHz）
技术指标
yzer Measurement mod Tranission(dB),return loss(dB),SWR(linearSWR),optiona group delay(ns),power(dBm)precision return loss(dB) and optionaldistance-to-fault
Dynamic range -55 to +16dBm,autozeroing with DC detection
Inputs Three,two standard inputs,A and B,with optionathird reference channel,R(Option 5)
Display channels Two channels are used to select and simultaneouslydisplay any two inputs fromA,B,or R.The inputs can also be displayed asratios A/R or B/R.
Scale rolution 0.1 to 10dB(m) per division in 0.1dB steps
Cursor functions Search for trace maximum,minimum,dB level,dBbandwidth,next marker and active marker
Averaging 2,4,8,16,32,64,128,or 256
Limit lin Two limit in,either single value or multilevel segmented,for each trace.Segmented lin may be made from up to 10individually editable segments.
Auto-zero Performs an AC modulation cycle and lowlevel calibration during sweeper ratrace
Save/Recall Thirteen sets of front panel set-ups andthirteen sets of trace memory can be stored in non-volatile instrument memory.
Trace mask A swept frequency measurement can be storedto a graticule trace mask for visual comparison to later measurements.
Disk drive Built-in 3.5 inch,1.44 floppy disk drive
Autosave Automatically increments the trace datafile name and reference nuer during succsive data storage operationsto the DOS disk
Source Frequency range 1Mhz to 110GHz,model dependent
Alternate sweep Sweep alternately between frequenc yrangset differently for channel 1 and channel 2
CW Provid single frequency output(both channelsturned off)
Frequency rolution Rf Model(54107A,54109A,54111A):10kHz,Microwavemodels:100khz
Output power Maximum guaranteed levelled output poweris model dependent.
Reverse power protection UP to 5 Watts.Limited to 1 Watt with attenuatoroption
Appli-
cation function Min/Max hold Save the minimum and maximum valu of succsivweeps or the coination of the two
Cursor functions Automatic cursor seach updat the bandwidth,minimum,ormaximum levels of the displayed trace.
Comprsion tt automation Determin the gain comprsion point overthe operating freqeuncy range of an ampliffier by succsively incrementingthe source power and measuring the amount of comprsion until a pret"X"dBlimit is exceeded.
Self tt Performs a self tt every time power isapplied or when SELF TT pushbutton is prsed.If an error is detected,adiagnostic code appears,identifying the cause and location of the error.
General Operating temperature 0°to 50℃
Power 48 to 400Hz,300VA
M 18kg(39lb.)
Printer Parallel printer interface is compatiblewith the Canon BJ30,Bj200e,and most Epson FX-compatible printers.
Transit case Hard shell case with custom foam inserts,PN:760-183
EMC Meets European community requirements forCE marking
订货信息 Model/Order No. Name
Option 1 Options
Rack mounting with slid
Option 2 70dB RF step attenuator
Option 2A 70dB,20Ghz MW step attenuator
Option 2B 70dB,26.5GHz MW step attenuator
Option 2C 70dB,40GHz MW step attenuator
Option 2D 70dB,50GHz MW step attenuator
Option 4 75Ω source output(available to 3.0GHz)
Option 5 Add reference channel
Option 6 Add external levelling
Option 7 Internal distance-to-fault software
Option 8 Internal relative group delay software
Option 12 Add front panel cover
Option 13 Add front mounted handl
Option 16 +15V DC supply for millimeter wave source modul(availablewith<20GHz models only)
Option 25 Maintenance manual
Option 26 Extra operation and GPIB programming manual
Option 33 Canon printer
