1. GB11158高温试验箱技术条件
2. GB10589-89低温试验箱技术条件
3. GB10592-89高低温试验箱技术条件
4. GB/T10586-89湿热试验箱技术条件
5. GB/T2423.1-2001低温试验箱试验方法
6. GB/T2423.2-2001高温试验箱试验方法
7. GB/T2423.3-93湿热试验箱试验方法
8. GB/T2423.4-93交变湿热试验方法
9. GB/T2423.22-2001温度变化试验方法
10. IEC60068-2-1.1990低温试验箱试验方法
11. IEC60068-2-2.1974高温试验箱试验方法
12. G150.3高温试验
13. G150.4低温试验
14. G150.9湿热试
技术参数:Technical parameter
其他说明
型号 Te |
TK-H-T27 | TK-H-T50 |
内部尺寸:w长x H高x D深(cm) Internal size |
30x30x30 | 45x40x30 |
外部尺寸:w长x H高x D深(cm) External size |
100x78x76 | 100x60x60 |
温度范围 Temperature range |
-40℃ ~ +100℃/+150℃ | |
湿度范围 Humidity range |
20% ~ 98%R.H. | |
温湿度解析/均匀度 Analytic accuracy /evenness degree of humiture |
&plun;0.1℃;&plun;0.1%R.H./&plun;1.0℃;&plun;3.0%R.H. | |
温湿度控制/波动度Control accuracy /evenness degree of humiture | &plun;0.1℃;&plun;2.0%R.H./&plun;1.0℃;&plun;2.0%R.H. | |
升温/降温时间Temperature rising/falling time | 约4.0℃/分钟;约1.5℃/分钟 | |
内外部材质Inner and outer material | 外部面板及内箱全为SUS 304#不锈钢.External panel and inner tank is SUS 304 # stainless steel. | |
保温材质Insulation material | 高密度氯基甲酸乙醋泡沫缘体材料Resistant to high temperature, high density, formate chlorine, ethyl acetum foam insulation materials | |
冷却系统Cooling system | 风冷式压缩机Air cooling compressor | |
保护装置Protection device | 温,过载,压,漏电,断水,短路保护Overheat, overload, overpressure, leakage, water-break, short-circuit protection | |
配件Parts |
记录仪,机软件,观视窗,测试孔,箱内照明灯,隔板,干湿球纱布 Recorder, upper computer software, watching window, Testing hole, lighting within tank, partition plate, wet&dry bulb gauze |
|
控制器control panel | 韩国TEMI温湿度控制器South Korea TEMI temperature and humidity controller | |
压缩机Compressor | 法国原装"泰康"压缩机 France Tecumseh Brandimported with original packaging compressor | |
电源Power | 1Φ 220VAC&plun;10% 50/60Hz & 3Φ 380VAC&plun;&plun;10% 50/60Hz |