询价
- 企业类型：贸易商
- 原产地：德国
热销德国BURKERT直动式电磁阀，宝得直动式电磁阀
1) FKM gasket in standard; 1 Kit including a green FKM and a black EPDM gaskets is supplied with each sensor.
Compact conductivity sensor for tank installation consists of:
- an immersion Kit consisting of : - a conductivity electrode* (has to be ordered separately)
- an immersion fitting* (has to be ordered separately)
- adaptation kit* on immersion fitting for sensor Type 8220, with extended cable (has to be ordered separately)
- a fixing kit*: flange DN65 with stainless steel screws (has to be ordered separately)
Ordering chart for accessories for conductivity transmitter Type 8225, sensor Type 8220
For compact conductivity transmitter Type 8225
Set with 2 reductions M20 x 1.5 /NPT1/2” + 2 neoprene flat seals for cable gland or plug + 2 screw-plugs M20 x 1.
Set with 1 stopper for unused cable gland M20 x 1.5 + 1 multiway seal 2 x 6 mm for cable gland + 1 black EPDM gasket for the
sensor + 1 mounting instruction sheet
For conductivity transmitter Type 8225 and sensor Type 8220
Set with 2 cable glands M20 x 1.5 + 2 neoprene flat seals for cable gland or plug + 2 screw-plugs M20 x 1.5 + 2 multiway
Set with 1 green FKM + 1 black EPDM gasket 552 111
Cable plug EN 175301-803 with cable gland (Type 2508) 438 811
Cable plug EN 175301-803 with NPT1/2 “ reduction without cable gland (Type 2509) - UR and UL approval 162 673
Conductivity electrode C = 0.
Conductivity electrode C = 0.
Conductivity electrode C =
Conductivity electrode C =9
Factory 2-point conductivity calibration certificate 550 675
Measuring chamber stainless steel 316L (1.4404)1) with G 1/2” connection thread 553 611
1) FKM gasket in standard; 1 Kit including a green FKM and a black EPDM gaskets is supplied with each sensor.
Compact conductivity sensor for tank installation consists of:
- an immersion Kit consisting of : - a conductivity electrode* (has to be ordered separately)
- an immersion fitting* (has to be ordered separately)
- adaptation kit* on immersion fitting for sensor Type 8220, with extended cable (has to be ordered separately)
- a fixing kit*: flange DN65 with stainless steel screws (has to be ordered separately)
Ordering chart for accessories for conductivity transmitter Type 8225, sensor Type 8220
For compact conductivity transmitter Type 8225
Set with 2 reductions M20 x 1.5 /NPT1/2” + 2 neoprene flat seals for cable gland or plug + 2 screw-plugs M20 x 1.
Set with 1 stopper for unused cable gland M20 x 1.5 + 1 multiway seal 2 x 6 mm for cable gland + 1 black EPDM gasket for the
sensor + 1 mounting instruction sheet
For conductivity transmitter Type 8225 and sensor Type 8220
Set with 2 cable glands M20 x 1.5 + 2 neoprene flat seals for cable gland or plug + 2 screw-plugs M20 x 1.5 + 2 multiway
Set with 1 green FKM + 1 black EPDM gasket 552 111
Cable plug EN 175301-803 with cable gland (Type 2508) 438 811
Cable plug EN 175301-803 with NPT1/2 “ reduction without cable gland (Type 2509) - UR and UL approval 162 673
Conductivity electrode C = 0.
Conductivity electrode C = 0.
Conductivity electrode C =
Conductivity electrode C =9
Factory 2-point conductivity calibration certificate 550 675
Measuring chamber stainless steel 316L (1.4404)1) with G 1/2” connection thread 553 611
