The TLS-5 Telephone Line Simulator offers the most convenient way to demonstrate or test telecom equipment where central office lines are not easily available.
The TLS-5 functions as a virtual CO switch simulator, providing four simulated central office lines with two talk paths, plus an audio interface port, making the TLS-5 a versatile device for applications.
- Features:
- Four loop start lines
- Two talk paths
- Programmable parameters:
- Primary/secondary telephone numbers up to 16 dis
- Ring cadence (distinctive ringing)
- Off-hook modes
- Network response time delays
- Test tone frequency and cadence
- Eight selectable ring waveforms
- Line attenuation
- Forced disconnect
- Dial up test tones
- Hot line ringdown - Automatically rings another station(s) when the handset is lifted.
- Precise call progress tones:
- Dial tone
- Busy signal
- Reorder tone
- Ringback
- Programmable call processing delays
- Selectable response to non-valid numbers
- PBX operations:
- Call transfer
- Call hold
- Conference calling
- Hunt group operation
- "9" access to outside line
- Forced disconnect - Disconnects either the caller or called party after a programmable delay.
- Audio port - Standard 5-pin DIN jack for recording or playing voice or tones.
- Caller ID:
- Bellcore single and multiple data message formats
- Te I (SDMF/MDMF)
- Te II (SCWID/CIDCW)
- Visual message waiting
- Programmable names (CID)
- Privacy blockage
- Out-of-area calls
- Tranission errors
- Calling number
- Caller nameDate and time of call
