产品说明:
上海旌派自主研发水浴氮吹仪用于气相、液相及质谱分析中的样品制备。它采用国际技术，通过将氮气吹入加热样品的表面进行样品浓缩。该方法具有省时操作方便、容易控制等特点，可很快得到预期的结果。该技术采用固相萃取前处理技术代替传统的液相萃取和层析技术，使样品得到分离、净化。用氮吹代替常用的旋转蒸发仪进行浓缩，使分析时间大为缩短。
主要特征:
1.水浴氮吹仪带有的试管架可方便地将试管移出或移入水槽，并可固定在任一高度。
2.铝材精雕成型导吹支架、食品级不锈钢试管支架。
3.食品级不锈钢管吹扫针、迷你山耐斯公母接头、日本原装软管。
技术参数:
1.型号：Jipad-DCY-12S
2.加热方式：水浴，孔数：12孔支架
3.加热功率：350W
4.温控范围：室温-100℃
5.恒温误差：±0.1℃
6.气体流量：0-5L/min
7.孔径(mm)：15
8.外形尺寸(mm):333*200*205
9.温控功能：设定、实际温度双四位数字LED显示，上限温度保护设定为80℃-110℃
Product description:
Shanghai Jing sent independent R & D bath nitrogen blowing instrument used for gas phase, liquid phase and sample preparation in m spectrometric ysis of preparation. It adopts the international recognition technology, through the sampleconcentration of nitrogen is blown into the heating of the sample's surface. This method has the features of convenient operation, time saving and easy to control,can quickly get the expected results. The technology using solid phase extractionpretreatment technique to replace the traditional liquid liquid extraction andchromatography techniques, so that the sample rapidly separation, purification.Blowing rotary evaporator instead of commonly used with nitrogen concentration,make the ysis time is shortened greatly.
The main features of:
Test tube rack 1 bath nitrogen blowing instrument with can be conveniently the tube out of or into the sink, and can be fixed at any height.
The 2 aviation aluminum carved molding blown bracket, food grade stainless steeltube scaffold.
3 independent food grade stainless steel pipe blowing needle, mini imports Taiwanshannaisi mother connector, Japan imported hose.
Technical parameters:
1 te: Jipad-DCY-12S
2 heating methods: bath, hole number: 12 holes of the support
The 3 heating power: 350W
Room temperature -100 DEG C temperature range: 4
5 constant temperature error: + 0.1 C
6 gas flow: 0-5L/min
The 7 aperture (mm):15
The 8 dimension (mm): 333*200*205
9 temperature control function: set and actual temperature four di LED display,upper limit temperature protection is set as 80 DEG -110 DEG
