TECHNIX高压充电电源

产品品牌：

TECHNIX

产品型号：

2500-5000J/s CCR系列

法国TECHNIX高压充电电源，主要作为高压电容器以及MARX发生器等设备的充电电源。

• Voltage & Current Outputs continuously adjustable from 0 to full scale
• High precision regulation
• Total protection against arcs, overloads and short circuits
• Over Temparature protection
• High reliability & efficiency
• Double Resonance Technology (ZVC)
• V & C Setting and Monitoring from front panel or REMOTE
• Automatic crossover
• Over Current Limitation and Protection functions
• Remote, Inhibit & Interlock functions
• Polarity display and 3½ digit displays
• Safety switch key
• Master-slaves architecture or Control Unit to 6 modules

* You can choose your own full scales (Vmax and Imax) even if these values are not available in standard. For example, you can get a 45 000 V generator based on 6 000 W model. In this case, you will get an Output Voltage adjustable from 0 to 45 000 V and an Output Current from 0 to 133.3 mA.

• Output Voltage and Output Current:
Both Voltage Output and Current Output are continuously adjustable from 0 to 100 % (full scale).
In local mode: by using 10 turns potentiometers resolution 0.05%
In remote mode: by an external 0 to 10 V


• Reproducibilty (pulse to pulse voltage variation):
Load Regulation: ± 0.25 % (Frequency < 10 Hz)
Line Regulation: ± 0.1 % ( for Main Voltage ± 10 %)


• Current regulation:
Load Regulation: ± 0.05 % (for 0 - 100 % load change)
Line Regulation: ± 0.05 % (for Main Voltage ± 10 %)


• Voltage Holding:
0.25 % p-p (better on request)


• Stored Energy:
0.2J/kJ


• Protections:
Against short circuit & HV arc to ground
Shutdown on Overtemperature, & open interlock


• Temperature Coefficient:
100 ppm/°C


• Efficiency:
> 90 % full load


• Stability (after one hour warm-up):
0.01 % / hour, 0.03 % / 8 hours of operating with constant load and ambient temperature.


• Temperature Coefficient:
100 ppm/°C


• Operating Temperature:
from 0 to 40°C


• Air Cooling


• Mains Voltage:
400 VAC ± 10 % 47 − 63 Hz 3 Phases + Earth


• Inrush current:
limited to full power operating current


• Power factor:
> 0.98


• Calibration:
with probes periodically approved by Authorized
Measurement Laboratories


• CE Marking