- 品牌/商标：日本横河
- 企业类型：贸易商
- 原产地：日本
现货AAI543-S50模块 电流输出模块（隔离）
Items | Specifications | |
Model | AAI543-□0□ | AAI543-□1□ (*2) |
Number of output channels | 16, isolated, standard switch-over response in redundant configuration (*3) | 16, isolated, fast switch-over response in redundant configuration (*3) |
Output signal | 4 to 20 mA | |
Withstanding voltage | Between output and system: 1500 V AC, For 1 minute (*4) | |
Allowable load resistance | 0 to 750 Ω | |
Circuit-open detection | Less than 0.65 mA | |
Accuracy | ±48 μA | |
Data update period | 10 ms | |
Drift due to ambient temperature change | ±16 μA/10 ?C | |
Maximum current consumption | 230 mA (5 V DC), 540 mA (24 V DC) | |
Weight | 0.4 kg | |
External communication | Pressure clamp terminal, MIL connector cable, Dedicated cable (KS1) | |
HART communication (*5) | Available | |
*1: Use two modules with the same suffix code foruse in dual-redundant configuration.
*2: When AAI543-□1□ is installed in a remote node, the ambienttemperature should be 0 to 60°C.
*3: The time during which the output to the fieldfalls below 4 mA at switch-over is 100 ms at maximum for AAI543-□0□(standard response) and 2 ms at maximum forAAI543-□1□ (fast response).When anyfast response field devices are connected to dual redundantly configuredmodules, AAI543-□1□ (fast response)should beused.
*4: The withstanding voltage for using thededicated cable is 500 V AC (between the input signal and the system).Thewithstanding voltage for using MIL connector cable depends on the electricalspecifications of its cable.
*5: When installing the module with HART functionto a remote node, the firmware of EB401 must be Rev 2 or later.For HARTfunction specifications, refer to “HART Communication Package (for A□I□□□-H) (GS 33Q03L70-31E).”
AAI543-S50模块输出4至20 mA。
分散控制系统：（DCS，即Distributed Control System），又叫集中分散控制系统，简称集散系统，也称其为分布式控制系统，它是利用计算机技术、控制技术、通信技术、图形显示技术实现过程控制和过程管理的控制系统，它以多台微机分散应用于过程控制，通过通信总线、CRT显示器，键盘、打印机等又能高度集中地操作、显示和报警。
