- 产品品牌：
- 立一
- 产品型号：
- LY-TS
冷热冲击试验箱用途Users： 冷热冲击试验机主要用于电子零件，材料的高低温冲击试验。 It is applicable to high&low temperature impacting test for electronic components and materials. 冷热冲击试验箱特点Characters： 冷热冲击试验箱上下两箱式结构转换速度快，恢复时间短。 操作简便，合理的风道循环系统，温度分布均匀。 中文界面液晶显示程序控制器。 强力入制冷进口压缩机，降温速度快。 完备可靠的安全装置。 高可靠性设计，适合于24小时连续试验 Three-zone structure meets high changeover speed and rapid recovering. Easy operation and reasonable wind cycle system and well distribution of temperature. LCD display controllor Taikong Franch compressor delivers high cooling speed. Reliability for protective devices. High reliability design is suitable for 24 hours test unremitting. 冷热冲击试验箱技术参数Specifications
| 工作室尺寸Inner Size(mm) | 400×350×300 | 400×500×400 | 500×600×500 | 500×750×600 | |||
| 温度范围Temperature Range | 高温室(High temperature room)：常温~+150℃ 低温室(Low temperature)：常温~-60℃ | ||||||
| 升降温速度Hoting&Cooling Speed | 平均每分钟(average value)1.5℃ | ||||||
| 温度波动Temperature Fluctuation | 小于(or better)±0.5℃ | ||||||
| 温度误差Temperature Deviation | 小于(or better)±2℃ | ||||||
| 温度转换时间Temperature Conversion Time | 小于(or better)10S | ||||||
| 温度恢复时间Temperature Recovery Time | 小于(or better)5min | ||||||
| 冲击转换方式Impact Method | 气缸转换Cylinder conversion | ||||||
| 材质Material | 外壳(external material)：SUS#304不锈钢板 内胆(internal material)：SUS#304不锈钢板 | ||||||
| 制冷系统Coolting System | 二元复式压缩机制冷(风冷或水冷)、进口法国泰康压缩机组、环保型冷媒 Water-cooled or air-cooled，Taikang compressor in France，environment friendly refrigerant | ||||||
| 电控系统Controllor | 日本进口可程式温度控制器、轴流式风机Programmable temperature controllor in Japan | ||||||
| 标准配置Standard Accessories | 观察窗、电缆孔、照明装置View windows，cable hole，lighting devices | ||||||
| 满足标准Desigh Standard | 产品满足GB，GJB，IEC，MIL，相应试验标准规定的试验方法 | ||||||
| 功率Rate Of Work | 7.5KW | 12KW | 26KW | 15KW | |||
| 电源Power | AC380V/50HZ三相四线交流电源Three phase and four-wire | ||||||
| 非标型号Remarks | 以上型号的规格供参考，特殊可按要求定制，技术指标详见产品说明书，交货期45天内 It can customiaze by customer demands.Technology index refer to product description.Delivery time within 45days. | ||||||
