| Basic Performance | | Frequency Range: 50 Hz - 12 MHz | | Gain: 0 - 90 dB in 0.1 dB steps. The horizontal and vertical gains may be adjusted separately or together. | | Rotation: Variable 0o - 359 o in 1 o steps | | Sweep: Variable from 0.005 - 4 seconds per division | | Low Pass Filter: 10 - 500 Hz and wide band | | High Pass Filter: Off or 2 to 500 Hz, 2 pole response | | Probe Drive: 2, 6, 12 volts | | Variable Persistence: 0.1 - 5 seconds | | Probe Types: Absolute and differential in either bridge or reflection configuration. The instrument is fully compatible with NORTEC PowerLink™ probes. | | Alarms: Can be set to trigger on positive or negative box, polar, or sweep alarm settings | | Alarm Modes: 1-3 box gates, polar, sweep, conductivity, and coating thickness | | Trace Storage: Up to 200 traces can be stored for recall. The traces can be static or frozen and can contain up to 60 seconds of movement. The traces are stored with the date and time of capture. | | Program Storage: Up to 200 instrument set-ups may be stored and recalled. The date and time of storage is recorded with each set-up. | | Print Out: Provides a custom configurable report header containing the display screen data and probe parameters including serial numbers (PowerLink™ probes only). |
Inputs / Outputs
| | Power: 2-pin connector to charge the internal batteries and operate the instrument from AC power | | USB Port: Allows interface with PC and printers | | Probe Connector: 16-pin LEMO and BNC | | Analog Outputs: Horizontal and vertical outputs of both F1 and F2. +/- 5 volts, 1 volt per division (four outputs) | | Alarm Outputs: 15-pin analog and alarm output connector | | VGA Output: 15-pin connector |
| General | | Dimensions: 8.5" L x 5.5" H x 2.4" D 216 mm x 140 mm x 61 mm | | Weight: 2.8 to 3.8 lbs. (1.2 to 1.7 kg), depending upon configuration | | Display: 5.25" x 3.9", 6.5" diagonal (133 mm x 99 mm, 165 mm) full VGA color LCD (640 x 480 pixels) | | Operating Temperature: -10° to 50° C (14° to 122° F) | | Humidity: 5 to 95% | | Classification: Based on Class 2 specifications from the MIL-PRF-28800F handbook | | Altitude: Maximum operating and non-operating altitude- 15,000 ft. (4600 m) | | Hazardous Area Operation: Safe operation as defined by Class I, Division 2, Group D, as found in the National Fire Association Code (NFPA 70), Section 500, and tested using MIL-STD-810F, Method 511.4, Procedure 1 |
| Power | | Power Requirements: 85 to 240 volts, 50-60 Hz. Battery can be charged within the instrument or in an external charger. Charge typically takes 4 hours. | | Available batteries: 2.4Ahr Li-Ion or 8.8Ahr Li-Ion | | Low Battery Protection: Display bar graph "gas gauge" indicates approximate operating time. A low battery annunciator indicates when approximately 10 minutes of operation time is left. | | Battery Operating Time: 3 to 8 hours nominal depending on configuration and scanner usage | | Frequency: 60 kHz or 480 kHz | | Conductivity (Nortec 500C, 500S, & Nortec D only) | | Digital Conductivity Specification: Digital conductivity display from 0.9% to 110% IACS or 0.5 to 64 MS/m. Accuracy within +/- 0.5% IACS from 0.9% to 65% IACS and within +/- 1.0% of values over 62%. Meets or exceeds BAC 5651 specifications. | | Non-Conductive Coating Thickness: Can measure non-conductive coating thickness from 0" to 0.015" (0 to 0.38 mm). Accuracy of +/- 0.001" (0.025 mm) over 0.00 to 0.015" (0 to 0.38 mm) range |
| Scanners (Nortec500S and Nortec 500D only) | | Scanner Compatibility: Will operate all current Nortec scanners and many other commercially available scanners | | Waterfall Display: 60 sweeps per hole and includes an on screen readout of the distance to the defect from the start of the scan (PS-5 only) |
| Dual Frequency (Nortec 500D only) | | Frequency Extension: 50 Hz to 12 MHz | | Second Frequency: 25 Hz to 6 MHz, 2nd frequency is an exact division of the first frequency in ratios of: 1/2 (F1 < 6 MHz), 1/4, 1/8, 1/16, 1/32. | | Display: Frequency 1 (F1) only, Frequency 2 (F2) only, sum of F1 and F2, difference between F1 and F2, split screen with selected combinations of F1 and F2 and mixed frequencies |
| Optional Accessories | | Protective Rubber Boot: 1020328 | | Chest Harness: EP4/CH | | External Barrery Charger: 3720308 | | Extra Li-Ion Battery: 2.4 Ahr or 8.8 Ahr |
*All specifications are subject to change without notice. |
